LSI SAS IR SNMP agent for Windows

NOTE TO SERVICE - Reference RETAIN #NA

(C) Copyright International Business Machines Corporation 1999, 2005. All rights reserved.
US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA 
ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the general information 
in "Notices and trademarks” in this document.


CONTENTS
________

1.0  Overview
2.0  Installation and setup instructions
3.0  Configuration information 
4.0  Unattended mode
5.0  Web information and support phone Number
6.0  Notices and trademarks
7.0  Disclaimer


1.0  Overview
________________________



        1.1     The LSI SAS IR SNMP agent for Windows is used to send SNMP alerts
                for Integrated RAID events on LSI 1064 and 1064e SAS Controllers.
        
        1.2     Limitations
                - none

        1.3     Enhancements
                - none

        1.4.    Level of Recommendations and Prerequisites for the
                update:
                - none

        1.5     Dependencies:
                - The LSI SAS device driver must be loaded.



2.0  Installion and setup instructions
______________________________________
   

2.1  Installation of SNMP 
 
If you do not have SNMP Service installed on your system, follow the steps below to install 
SNMP Service for Windows System. 
 
Step 1: Select Add/Remove Programs from Control Panel. 
 
Step 2: Select "Add/Remove Windows components" in the left side of the "Add/Remove 
Programs" window. 
 
Step 3: Select "Management and Monitoring Tools". 
 
Step 4: Click Next. 
 
Now you will be prompted to insert Windows CD and SNMP Service will be installed. 
 
 
2.2  Configuration of SNMP 
 
Step 1: Select "Administrative Tools" from Control Panel 
 
Step 2: Select Services from "Administrative Tools" window. 
 
Step 3: Select SNMP Service in the "Services" window. 
 
Step 4: Open SNMP Service. 
 
Step 5: Go to "Security" tab and make sure that "Accept SNMP Packets from any host" is 
selected. 
 
Step 6: Go to "Traps" tab and the list of host IPs to which you want the traps to be sent with 
community name. 
 
 
2.3  Installing the LSI SNMP Agent 
 
Step 1: Run setup.exe 
 
Step 2: Now use SNMP Manager to retrieve the SAS IR data (It is assumed that you have 
compiled LSI-MegaRAID_Sas_IR.mib file already). The LSI-MegaRAID_Sas_IR.mib file is 
available at the same location as setup.exe 
 
Step 3: Use Trap utility to get the traps. 
 
 
NOTE: Before you install the Agent, Make sure that SNMP Service is already installed 
in the system. 


3.0     Configuration information
__________________________________
		
		N/A


4.0     Unattended Mode
________________________

		N/A


5.0     Web information and support phone number
_________________________________________

        5.1     IBM Support Web Site:
                http://www.ibm.com/support/.
       		
     		For a list of supported operating systems on legacy (non-shipping) 
     		controllers, see http://www.ibm.com/servers/eserver/serverproven/compat/us/.

		You can receive hardware service through IBM Services or through your IBM
           	reseller, if your reseller is authorized by IBM to provide warranty service. See
           	http://www.ibm.com/planetwide/ for support telephone numbers, or in the U.S.
            	and Canada, call 1-800-IBM-SERV (1-800-426-7378).

            	In the U.S. and Canada, hardware service and support is available 24 hours a day,
            	7 days a week. In the U.K., these services are available Monday through Friday,
            	from 9 a.m. to 6 p.m.


        5.2     IBM eserver xSeries Web Site:
                http://www.ibm.com/eserver/xseries

        5.3     If you have any questions about this update, or problems applying the update, 
		go to the following Help Center World Telephone Numbers and URL:
                http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html.


6.0.    Notices and trademarks 
______________________________

        6.1     The following terms are trademarks of the IBM 
                Corporation in the United States, or other countries
                or both:
                            * IBM
                            * Advanced System Management

                Other company, product, and service names may be
                trademarks or service marks of others.

7.0.    Disclaimer
__________________

        7.1     THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
                ANY KIND.  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
                OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
                WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
                MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN
                THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
                GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.ESPECT TO THE INFORMATION IN
                THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
                GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.S.