*********************************** * * * MegaRAID IDE Driver Diskette * * * *********************************** ==================== Contents on the disk ==================== README TXT This readme file MEGAIDE Microsoft Windows miniport disk label file TXTSETUP OEM Microsoft Windows miniport text mode setup file Serv2003 MEGAIDE SYS Microsoft Windows Server 2003 miniport driver MEGAIDE INF Microsoft Windows Server 2003 setup file WIN2K MEGAIDE SYS Microsoft Windows2000 miniport driver MEGAIDE INF Microsoft Windows miniport setup file WINNT MEGAIDE SYS Microsoft Windows NT 4.0 miniport driver MEGAIDE INF Microsoft Windows miniport setup file WINXP MEGAIDE SYS Microsoft Windows XP miniport driver MEGAIDE INF Microsoft Windows miniport setup file ================ Software Version ================ Microsoft WindowsNT miniport driver 4.1.0724.2003 Microsoft Windows 2000 miniport driver 4.1.0724.2003 Microsoft Server 2003 miniport driver 4.1.0724.2003 Microsoft Windows XP miniport driver 4.1.0724.2003 ========== What's New ========== Driver version 4.1.0724.2003 - problem of not sending proper error log info to applicaion is fixed. Driver version 4.1.0721.2003 - The Stripe Size problem is fixed in Driver for all the path and for RAID 1. Driver Version 4.1.0709.2003 - The INODE fix is changed to a common code so that it is applicable to all the chips. Driver Version 4.1.0626.2003 - Stripe size reported to application is fixed. - The Write verify command was not getting completed in Reset bus if the Drive power is pulled. - Inode Fix is incorporated for all the controllers. Driver version 4.1.0426.2003 - Fastidefirecommand Modified for better performance. - Base Class and Sub Class Code check added in driver. Driver version 4.1.0412.2003 - The Reset bus seen on RAID 10 configuration is fixed. - Low performance seen on the Disk Transfer Rate test is fixed. Driver version 4.1.0313.2003 - The system Hang on drive power pulling is fixed. Driver version 4.1.0312.2003 - The system crash on drive power pulling in case of raid 0 is fixed. - The reset bus reported by the testing team is resolved in this driver. - The data integrity test failing on dit32 is fixed. - Inf checker failing for .Net 2003 is fixed and verified. Driver version 4.1.0307.2003 - The Driver now updates the Timestamp Following the protocol provided by the BIOS Team. Driver version 4.0.0303.2003 - IOCTL IOC_GET_CONTROLLER_INFO modified to provide subsystem device id and vendor id information. Driver version 4.0.0225.2003 - This Driver has a additional interface for providing the Aspi PASSTHRU IOCTLs. Driver version 4.0.0129.2003 - The inconsistencies were not reported by the driver for IRCD2x.This Driver reports the inconsistencies to Spy. - The Hotspare drive was indicated as a part of array for IRCD2x. Driver version 4.0.0115.2003 - The Driver version in the .INF file is corrected. - The Driver now updates the time stamp when updating the IRCD. - Fixes for CSB6. - Check added for not to post commands to the removed drive. - Time stamp update for Ircd 2x. Ver 4.0.2002.0916-Sept 16,2002 · Drive insertion and Removal Fine Tuned and Reset bus on Drive insertion eradicated. · When the Logical Drive is deleted the Drive’s Hold Queue is scanned and all the commands for that logical drive will be cleared. · Nodev.Inf File changed to address the Driver upgrade issue. · Load Balancing algorithm modified for better performance. · When the Drive was made Hotspare sometime the system was crashing. The problem is taken care in this release. · Updating IRCD modified to go through the new path. · Failing of the Raid 0 Drive was previously rejected by the driver. The driver now handles this call. Ver 4.0.2002.0809-Aug 09,2002 * Gate Keeper Opertation update when the Physical Drive status is changed. * Deleting the Logical drive when IOs are going on was resulting in Reset BUS. The Dirve was not handling properly the commands in the Queue for that Logical Drive. Ver 4.0.2002.0805-Aug 05,2002 * Physical Drive Status is filled when the New IRCD is obtained. * Status Incompatibility for OFFLINE Status between Driver and Application is removed. Ver 4.0.2002.0801-Aug 01,2002 * Error in handling Spurious Interrupts is fixed. * The Transfer mode for the drive was not getting programmed with a value set in enquiry. This is taken care in this release. * This Driver initiates a bus rescan when a logical drive is inserted or deleted. * This Driver initiates a bus rescan when a logical drive is inserted or deleted. * This Driver Notifies the Application about the Drive whose power is pulled. * TextSetup.Oem Modified to give the Option for Windows .NET and Windows XP. Ver 4.0.2002.0717-july 17,2002 * Requested Subsystem Device ID and Vendor ID supported. Ver 4.0.2002.0701-july 01,2002 * Diagnostics IOCTLS implemented. * physical Drive insertion and Removal IOCTLS implemented. * Make Drive online now checks for the Deleted drives before making them online. * Auto Resume feature of Rebuilding and consistency is now limited only to power failure cases. Ver 4.0.2002.0618-June 18,2002 * Logical Drive insertion and Deletion is Tested and fixed. * Installation of OS on any Logical Drive is Implemented. * Class Code Check for loading the Driver is implemented. Ver 4.0.2002.0531-May 31,2002 * Driver was not handling IO's in proper fasion and Internal Queue corruption was happening for IO's when check consisteny was going on.This Que corruption was leading to System crash. This driver has the fix for this problem. * Installation strings are changed. Ver 4.0.2002.0528-May 28,2002 * Driver was not able to Update the IRCD after rebuild.This driver takes care of this issue and Updates the IRCD successfully. Ver 4.0.2002.0522-May 22,2002 * Windows NT Installation problem is Fixed. * Dummy Device Is modified so that Windows will not see any RAID dummy device. * Additional check for Gate commands While merging the commands is put in. * Both the IRCD buffer are synchronized for the IOCTL Path. * Strings are modified in TextSetup.oem. Ver 4.0.2002.0516-May 16,2002 * The driver was not filling up the stripe size properly and this caused problems in Raid 0. Ver 4.0.2002.0515-May 15,2002 * Additional Validations for the parameters are added for stability of the driver. * The driver was not filling up the Checksum for the IRCD and IRCD header in the IOCTL path. The Driver now takes care of it. Ver 4.0.2002.0514-May 14,2002 * The IOCTLS Read Write IRCD and Read Write Enquiry were not handled properly and were leading to problems with Drive Rebuilding. The variables used in these IOCTLS are now handled properly. * The Driver was not filling up the Array information properly in the case of Multiple arrays and hence the Driver was behaving Strange with Two Arrays. Now the proper values are filled up in Driver data Structures and Driver works fine with multiple Arrays. Ver 4.0.2002.0509-May 09,2002 * The Driver was Crashing after the first phase of windows 2000 installation. Ver 4.0.2002.0503-May 03,2002 * The Message string has been changed in textsetup.oem file. * The driver was not updating the IRCD Checksum and hence had some compatibility problems with bios released on 24th April. Driver now updates the Checksum correctly. * Drive Insertion and removal is implemented for Yellow stone. * CRC Error handling is implemented for Yellow Stone. Ver 4.0.2002.0426-April 26,2002 * The Driver was not loading with latest Bios Released on 4/24/2002. The Problem is fixed. Ver 4.0.2002.0425-April 25,2002 * IOCTL Implementation Enhanced. * Some Ioctl implementation bugs were fixed. Ver 4.0.2002.0321-March 28,2002 * The New IRCD (v3.x) as documented in Rev1.03 is supported by this driver. The old IRCD (v2.x) is also supported for compatibility reasons. * The new ioctls documented in the IDE Driver Interface Rev2.7 are supported with some restrictions. * 48-bit addressing support was fully implemented. * Rebuilding is done on a Physical Drive basis. * Check Consistency is done on a Logical Drive basis, so multiple Check Consistency per array are feasible. * Auto resume of rebuilding is supported by the driver, ie., a rebuild which has been aborted by the user can be restarted. * The following ioctls have been added : * IOCTL Get Version * IOCTL Physical Drive Info * IOCTL Logical Drive Info * IOCTL Raid Status Info_EX * IOCTL SetDrive Status * IOCTL Send Activity_EX * IOCTL Get Activity_EX * GET / SET EnquiryData * GET / SET IRCD Data ( With some restriction) Ver 3.0.2002.0321-March 21,2002 * The Event count was not reduced even when we were discarding the Oldest event from the log and now is taken care in the code. Ver 3.0.2002.0320-March 20,2002 * Queue manupulating fix is made to the buffer holding the events Ver 3.0.2002.0319-March 19,2002 *When the write error the the reason for command now logs as OTHER Error rather than medium error. Though the last release 3.0.2002.0318 also address this issue due to some inconsistencies in the driver the issue was not resolved. Ver 3.0.2002.0318-March 18,2002 * When the write error the reason for command now logs as OTHER Error rather than medium error. Ver 3.0.2002.0317-March 17,2002 * The Driver Now removes the hotSpare drives from the Logical Drives and hence fills the information corretly to the Spy. Ver 3.0.2002.0315-March 15,2002 * The Driver differentiates medium errors from other errors and Logs the messeges accordingly. Ver 3.0.2002.0313-March 13,2002 * Fixed the problem of Write Errors were being posted as Medium Errors to Logs. * Instead of posting Sector of the actual error we were posting the offset where error occured. Ver 3.0.2002.0312-March 12,2002 * Smart status and Command type for read error. * Adding new drive only to spare pool. * Blue panic when boot from degraded array. * Additional Sub system Device Id and subsystem Vendor ID added for Toshiba ver 3.0.2002.0308 -March 08, 2002 * Fixed the problem for drive disappearing on write error. * NVRAM Events fixed. ver 3.0.2002.0305 -March 05, 2002 * Boot up Problem fixed. * Fix for Making the Drive hotspare. * Fixed the bug for Write Errors. ver 3.0.2002.0301 -March 01, 2002 * Rebuild initiation error is fixed. * Structures Packed identically in Application and driver. ver 3.0.2002.0226 -Feb 26, 2002 * I/O Error Recover is implemented. * Rebuilding Error Recovery is implemented. * Error Injection and Validation is implemented. ver 3.0.2002.0219 -Feb 19, 2002 * This Driver implements the new Error handling Algorithms. ver 3.0.2002.0214 -Feb 14, 2002 * ServerWorks Support is added and tested for WindowsNT 4.0 and Windows2000. ver 3.0.2002.0205 -Feb 05, 2002 * Driver Crash when the spy was started under windows 2000. * Added Support for Serverworks Board. ver 3.0.2002.0125 -Jan 25, 2002 * Driver Crash During Bootup when SPY installed as service is fixed. * Problem of not firing commands to the slave Drive is fixed. ver 3.0.2002.0114 -Jan 14, 2002 * Some problems in Starting the rebuilds are fixed. ver 3.0.2002.0108 -Jan 08, 2002 * Some problems in Drive insertion and removals fixed. * Now supports higher capacity drives * 680 chip support added * Some problems with NVRAM events fixed. * Error handling enhanced. ver 3.0.2001.1218 - Dec 18, 2001 * Problem of drive removal after inserting causing system freeze fixed * Driver application interface changed for NVRAM events. * provided new IOCTL interface to the application ver 3.0.2001.1130 - Nov 30, 2001 * Drive insertion problems fixed * Now the error path will use the Drive's block reassignment feature * Provided extra function for the application * Drive removal notification will now work for spare drives and failed drives also ver 3.0.2001.1121 - Nov 21, 2001 * Blue Screen Fix while inserting the Drive is incorporated. * Error Log IOCTL implementation is done. * Timeout Problem is fixed. * SMART Implementation is done. * PASSTHRU implementation is done. ver 3.0.2001.1120 - Nov 20, 2001 * Error Log is implemented * PassThru and Smart implementation done * Problem with NVRam events posting is fixed * IRCD updation problem fixed. ver 3.0.2001.1115 - Nov 15, 2001 * Windows NT Installation Bug fixed. * Flag updation corrected. ver 3.0.2001.1105 - Nov 05, 2001 * Fixed the Consistancy check Issues. * Fixed Rebuild Issues. * Fixed Verify command issues. ver 3.0.2001.1026 - Oct 26, 2001 * Fixed all IRCD updation problems. ver 3.0.2001.1024 - Oct 24, 2001 * Disabled LSI backplane support, since it is malfunctioning in NT. * Ported previously 2k driver for NT. ver 3.0.2001.1019 - Oct 19, 2001 * Initial Binary for 3.0.