File Name ibm_fw_bcio_cpm7_anyos_anycpu.txt



       IBM BladeCenter Copper Pass Thru Module (CPM) Microcode Update


       CONTENTS

       ---------



       1.0   Overview

       2.0   Installation and Setup Instructions

       3.0   Configuration Information

       4.0   Unattended Mode

       5.0   Web Sites and Support Phone Number

       6.0   Trademarks and Notices

       7.0   Disclaimer





       1.0   Overview:  The CPM microcode changes between v4 through v7 are

             very minimal.  Only the thermal threshold at which warnings are issued

             and the module shuts down are changed.  Some hot environments had been

             experiencing unecessary thermal warnings (no one has reported a shutdown).

             v6 code enables support for a new microprocessor and fixes a minor bug

             encountered when the module experiences temperatures below 0 degress C.

             1.1   Overview about this code

             1.2   Limitations

             1.3   Level of Recommendations and Prerequisites for the

                   Update:


                   This update is only required if the customer receives and

                   is troubled over temperature warnings during normal operation or

                   if the module runs in environments with below zero degrees

                   Celcius conditions.


             1.4   Dependencies:

                   - none


       2.0   Installation and Setup Instructions

       -----------------------------------------



             3.1   This code is updated from the I/O module code update screen of

                   BladeCenter management module.



       3.0   Configuration Information

       -------------------------------


              3.1  - none - all configuration information is preserved.



       4.0   Unattended Mode

       -------------------------------

             The update does not support unattended installation directly from the firmware.  The

             management module unattended options should be applied.


       5.0   WEB Sites and Support Phone Number

       ----------------



             5.1   IBM Support Web Site:

                   http://www.ibm.com/pc/support



             5.2   IBM Marketing Netfinity Web Site:

                   http://www.pc.ibm.com/netfinity



             5.3   If you have any questions about this update, or problems

                   applying the update go to the following Help Center World

                   Telephone Numbers URL: 1-800-772-2227

                   http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html.





       6.0   Trademarks and Notices

       ----------------------------

        The following terms are trademarks of International Business Machines

        Corporation in the United States, other countries, or both:

           IBM

        Other company, product, or service names may be trademarks

        or service marks of others.


       7.0   Disclaimer

       ----------------------------



             7.1   THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF

                   ANY KIND.   IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS

                   OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED

                   WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND

                   MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS

                   DOCUMENT.   BY FURNISHING THIS DOCUMENT, IBM GRANTS NO

                   LICENSES TO ANY PATENTS OR COPYRIGHTS.





             7.2   Note to Government Users

                   Include the following note after the disclaimer paragraph.



                   Note to U.S. Government Users -- Documentation related to

                   restricted rights -- Use, duplication or disclosure is

                   subject to restrictions set forth in GSA ADP Schedule

                   Contract with IBM Corporation.