===============================================================================
" IBM Automatic Server Restart Device Driver Release Note                     "
" Release Version: 1.0.0.0                                                    "
" Release Date   : May 5, 2006                                                "
===============================================================================

Copyright Notice 
~~~~~~~~~~~~~~~~

IBM Automatic Server Restart Device Driver Release Note
Copyright (c) 2006 Foxconn LTD. All Right Reserved

Version 1.0.0.0 (First release)
^^^^^^^^^^^^^^^
IBM Automatic Server Restart (ASR) device driver is the Windows driver apply to
IBM system x 3105 M/B. By default, the ASR function on system x 3105 M/B is disabled. It is
activated only when the ASR driver is installed on the system.


IBM Automatic Server Restart device driver supports these Windows versions:

 - Windows Server 2003 Standard/Enterprise/Web Edition (32-bit)
 - Windows Server 2003 Standard/Enterprise/Web Edition (64-bit)
 - Windows Server 2003 R2 Standard/Enterprise Edition (32-bit)
 - Windows Server 2003 R2 Standard/Enterprise Edition (64-bit)
 - Windows Small Business Server 2003 SE/PE
 - Windows Server 2000
 

Driver Installation:

  - To install the driver on Windows Server 2003: 
    1. Double-click the 'Add Hardware' wizard in Control Panel. 
    2. At the 'Welcome to the Add Hardware Wizard', click 'Next'. 
    3. Select 'Yes, I have already connected the hardware' and then click 'Next'. 
    4. Select 'Add a new hardware device' from the list and then click 'Next'. 
    5. Select 'Install the hardware that I manually select from a list 
       (Advanced)' and then click 'Next'. 
    6. Select 'Show All Devices' from the list and then click 'Next'. 
    7. Click 'Have Disk'.
    8. At 'Copy manufacture's files from', point to the directory that contains 
       INF file and then click 'OK'.
    9. At 'Select the device driver you want to install for this hardware',
       click 'Next'.
   10. At 'The wizard is ready to install your hardware', click 'Next'. Make 
       sure the SYS file is copied under appropriate subdirectory (i386, 
       amd64). 
   11. Click Finish at 'Completing the Add Hardware Wizard'. 

  - To install the driver on Windows 2000: 
    1. Double-click the 'Add/Remove Hardware' wizard in Control Panel.
    2. At the 'Welcome to the Add/Remove Hardware Wizard', click 'Next'. 
    3. Select 'Add/Troubleshoot a device' and then click 'Next'. 
    4. Select 'Add a new device' from the list and then click 'Next'.
    5. Select 'No, I Want to Select the Hardware from a list' and then click
       'Next'.
    6. Select 'Other Devices' from the list and then click 'Next'. 
    7. Click 'Have Disk'.
    8. At 'Copy manufacture's files from', point to the directory that contains 
       INF file and then click 'OK'.
    9. At 'Select a Device Driver', click 'Next'.
   10. At 'Start Hardware Installation', click 'Next'. Make sure the SYS file 
       is copied under appropriate subdirectory (i386).
   11. Click Finish at 'Completing the Add/Remove Hardware Wizard'. 



  
                                 ~~ The End ~~e Wizard'. 



  
                                 ~~ The End ~~nd ~~