Analog Devices Inc. SoundMAX(R) Windows(R) 2000/XP 64 WDM Driver INSTALLATION AND REMOVAL INSTRUCTIONS: HD AUDIO INSTALLATION PRE-REQUIREMENTS If you have an HD Audio codec you need to install a QFE to allow the SoundMAX audio driver installation to happen. This QFE is made available by Microsoft, and it is required to update Operating System components before installing the audio driver. The QFE contains the required files and a readme which outlines installation procedure. This QFE and these files are distributed by Microsoft only, please contact them directly if you need to get them. Installation or Update of Analog Devices SoundMAX Audio Driver NOTE: Remove any previously installed driver using the instructions in the next section. 1. From the task bar, click on Start -> Run. 2. In the Run dialog box, type X:\path\setup, where X:\path is the full path to the root of the installation media. 3. When installing,the SoundMAX Install dialog box appears. In the dialog box, press Next. When upgrading or reinstalling, "Setup Type" dialog box appears. In the dialog box, select "Reinstall or Upgrade" radio button, then press Next. 4. Click on the Next and OK prompts as they appear. 5. Reboot the system to complete the installation. Removal of Analog Devices SoundMAX Audio Driver 1. From the task bar, click on Start -> Settings -> Control Panel, or for Windows XP, click on Start -> Control Panel. 2. Double-click on the Add/Remove programs icon. 3. Double-click on SoundMAX Install. (A dialog box appears.) 4. Select Remove and then press Next. 5. Reboot the system to fully uninstall the drivers. TO INSTALL USING AN INF FILE: (Note: The procedure may vary slightly between Operating Systems and configurations) 1. Find the location of the following files: AC '97 * smwdm.sys * smwdm.inf HD Audio * adihdaud.sys * adihdaud.inf 2. Open Control Panel using the Start Menu->Settings->Control Panel and double click the System icon. 3. Select the Hardware tab and click the Device Manager button. *For Windows XP (AC'97 driver install) a. If Multimedia device is "Intel(r) 82801 BA/BAM AC'97 Audio Controller" (default), remove device and rename corresponding inf file C:\WINDOWS\Inf\wdma_int.inf into C:\WINDOWS\Inf\wdma_int. b. Select "Scan For The Hardware Changes". c. In the "Add New Hardware Wizard" dialog box, select "Install from the list of specific locations" radio button and click Next. d. Select location of the driver files noted above and click Next to install driver. If Multimedia Audio Device is older version, follow driver update procedure described below for other operating systems. NOTE: Different actions are necessary depending on whether a Multimedia Sound Device is present. * If a Multimedia Sound Device is present (like "SoundMAX Integrated Digital Audio" or a generic (or native) sound driver), complete the following steps. a. Double-click on the device. b. Select Driver tab. c. Click Update Driver. d. At hardware update Wizard Dialog box, select "No. not at this time" e. Click on Next. f. Select "Install from a list or specific location (Advanced) g. Select "Don't search, I will choose the driver to install". h. Click on Next. i. Click on "Have Disk" j. Enter or Browse to the location containing the driver and inf files to install k. At Install from Disk dialog box, Click OK button. l. Select SoundMax Integrated Digital Audio and Click Next m. Click Finish. n. After driver finishes installing, Click Close. o. Close any other open dialog box. * If a Multimedia Sound Device is NOT present, complete the following steps. a. Click refresh. NOTE: A multimedia device will be found. b. Select Search for a better driver. c. When prompted for a location, select a specific location and enter the one noted above. TO UNINSTALL WHEN USING INF FILE: 1. Open System Properties using the Start Menu->Settings->Control Panel and double Click on System Icon. 2. Select the Hardware tab, and click the Device Manager button. 4. Select Sound, Video and Game Controllers -> SoundMAX integrated Digital Audio device. 5. Right click and select uninstall or click the Uninstall icon with the red X. 6. Following an uninstall, the system must be restarted before another install can be run. The Windows Plug and Play System maintains a backup copy of the driver and will re-install it automatically upon reboot unless another driver replaces it. If you wish the driver to be completely removed from the system, complete the following steps: Using Windows Explorer, delete the following from the WINDOWS directory (WINNT for Windows 2000): a. For Windows 2000/Windows XP: C:\WINNT\inf\OEMn.inf, or C:\WINDOWS\inf\OEMn.inf for Windows XP, (where n is an integer) Only delete those files that are copies of: Smwdm.inf for AC'97 or adihdaud.inf for HD Audio (they will be named OEMn.inf [where n is an integer]). Also, delete the corresponding .pnf files. b. C:\Windows\system32\drivers\smwdm.sys => for AC'97 Audio C:\Windows\System32\drivers\adihdaud.sys => for HD Audio UNATTENDED (SILENT) INSTALLATION INSTRUCTIONS Unattended installations use an Install Shield Silent Response File (setup.iss) to provide user input. Running an Unattended (Silent) Installation Run SETUP.EXE as described in the installation section above, but with the -s parameter: in the Run dialog box, type X:\path\setup -s NOTE: When running an installation in silent mode, no messages are displayed. Instead, a log file named Setup.log captures installation information, including whether the installation was successful. Running an Unattended (Silent) Uninstallation 1. From the task bar, click on Start -> Run. 2. In the Run dialog box, type X:\path\setup -s REMOVE, where X:\path is the full path to the root of the installation media. 3. Reboot the system to fully uninstall the drivers. *********************************************************************** This driver is built for the Microsoft(R) Windows Operating Systems. Copyright 2006 Analog Devices, Inc. All names mentioned herein are a registered trademark or a trademark of Analog Devices or its respective owners. All rights reserved. *********************************************************************** Version 6.0.1.2 herein are a registered trademark or a trademark of Analog Devices or its respective owners. All rights reserved. *********************************************************************** Version 6.0.1.20.1.2