File Name: readme.txt IBM xSeries 235 Diagnostics Flash Update Diskette readme.txt Version 1.04 System 8671 CONTENTS --------- 1.0 Overview 2.0 Change History 3.0 Installation and Setup Instructions 4.0 Configuration Information 5.0 Unattended Mode 6.0 Web Sites and Support Phone Number 7.0 Trademarks and Notices 8.0 Disclaimer 1.0 Overview -------------- 1.1 Overview about this code This README file contains the latest information about installing the IBM xSeries 235 Diagnostics. 1.2 Limitations N/A 1.3 Enhancements N/A 1.4 Level of Recommendations and Prerequisites for the Update N/A 1.5 Dependencies N/A 2.0 Change History -------------------- 2.1 IBM xSeries 235 Diagnostics Flash Update Diskette 1.03 to 1.04 - Fixed a problem where 5 LEDs on the front panel fail to light during the LED test when an ethernet card is installed 2.2 IBM xSeries 235 Diagnostics Flash Update Diskette 1.02 to 1.03 - Added support for RSA II 2.3 IBM xSeries 235 Diagnostics Flash Update Diskette 1.01 to 1.02 - Added support for 533 MHz Front Side Bus 2.4 IBM xSeries 235 Diagnostics Flash Update Diskette 1.00 to 1.01 - fixed a problem which prevented you from looping quick or normal tests with a USB keyboard attached 2.5 IBM xSeries 235 Diagnostics Flash Update Diskette 1.00 - Initial Release 3.0 Installation and Setup Instructions ----------------------------------------- 3.1 Step by step instructions for this code update - Insert the "IBM xSeries 235 POST/BIOS Flash Diskette" into drive A. - Start up or restart your IBM xSeries 235 server. - The server will boot from the diskette and present a Main menu offering several options. Choose "2 - Update Diagnostic". - The system will prompt you to insert the diskette containing diagnostics file $GRydiag.us1. Insert the "IBM xSeries 235 Diagnostics Flash Update Diskette 1 of 2" into drive A and hit enter. - After loading the image from the first diskette, the system will prompt you to insert the diskette containing diagnostics file $GRydiag.us2. Insert the "IBM xSeries 235 Diagnostics Flash Update Diskette 2 of 2" into drive A and hit enter. - After the second image is loaded from diskette, the system will ask you to wait while the images are flashed into ROM. When this is complete you will be prompted to remove the diskette and hit enter to restart the system. 3.2 Other N/A 4.0 Configuration Information ------------------------------- N/A 5.0 Unattended Mode --------------------- 5.1 Steps for unattended mode - Boot to DOS - Copy flash2.exe from the "IBM xSeries 235 POST/BIOS Flash Disk" and all *.us* files from the "IBM xSeries 235 Diagnostics Flash Update Diskette" to the same directory on some media capable of storing 1.44MB of data - From the directory just copied to, run "flash2.exe /u /d" 6.0 WEB Sites and Support Phone Number ---------------------------------------- 6.1 IBM Support Web Site: http://www.pc.ibm.com/support 6.2 IBM Marketing xSeries Web Site: http://www.ibm.com/eserver/xseries 6.3 If you have any questions about this update, or problems applying the update go to the following Help Center World Telephone Numbers URL: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html. 6.4 Intellistation web site http:www.pc.ibm.com/intellistation 7.0 Trademarks and Notices ---------------------------- N/A 8.0 Disclaimer ---------------- 8.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 8.2 Note to Government Users Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.