IBM eserver 326m Baseboard Management Controller (BMC) Windows Update Version P4 1.10 - Build P4ET10A Installation README File CONTENTS ________ 1.0 Overview 2.0 Change History 3.0 Installation and Setup Instructions 4.0 Configuration Information 5.0 Unattended Mode 6.0 Web Sites and Support Phone Number 7.0 Trademarks and Notices 8.0 Disclaimer 1.0 Overview 1.1 This README file contains the latest information about installing the IBM BMC code. 1.2 Limitations - NA 1.3 Enhancements - NA 1.4 Level of Recomendations and Prerequisites for the Upate: 1.5 Dependencies 2.0 Change History =============================================== MS-9549 BMC Firmware Release Notes Version: P4 1.10 =============================================== BIOS Version: P4 1.01 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9166 HW Version: B ------------------------------------------------------------ Modification ------------------------------------------------------------ 1. Fixed BMC failing BIST (Built-in self test) with P4ET09/P4JT16A 2. Fixed BMC unreachable on power down 3. Fixed System Overtemperatures that were not logged in BMC SEL log =============================================== MS-9549 BMC Firmware Release Notes Version: P4 1.03 =============================================== BIOS Version: P4 1.01 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9166 HW Version: B ------------------------------------------------------------ Modification ------------------------------------------------------------ - Fix BMC responding on LAN channel interface when using Serial interface - Implement GET_CHannel_info on the serial interface - Add BMC response for Serial channel in serial/modem configuation - Fix Serial channel info from BMC =============================================== MS-9549 BMC Firmware Release Notes Version: P4 1.02 =============================================== BIOS Version: P4 1.03 Broadcom(5714) FW Version:Boot Code:3.09 ,IPMI-PT:6.03 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9166 HW Version: B ------------------------------------------------------------ Modification ------------------------------------------------------------ - Fix GetDeviceID version defect =============================================== MS-9549 BMC Firmware Release Notes Version: P4 1.01 =============================================== BIOS Version: P4 1.03 Broadcom(5714) FW Version:Boot Code:3.09 ,IPMI-PT:6.03 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9166 HW Version: B ------------------------------------------------------------ Modification ------------------------------------------------------------ - Add Model Type=0x7969 - Fix Get ACPI Power Error Count defect =============================================== MS-9549 BMC Firmware Release Notes Version: P4 1.00 =============================================== BIOS Version: P4 1.00 Broadcom(5714) FW Version: ?.?? Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9166 HW Version: B ------------------------------------------------------------ Modification ------------------------------------------------------------ - Firmware P4 1.00 is based on DE Firmware M2 1.13 - Add 3 bytes(13th ,14th and 15th) at end of Response Data of "Get Device ID Command" to indicate this Firmware is for P4. 13th byte is 50h(ASCII Code: P) , 14th byte is 34h(ASCII Code: 4) and 15th byte is 45h(ASCII Code: E). 3.0 Installing and Setup Instructions 3.1 Step by step instructions for this code update (GUI) - Run the "IBM eserver 326m Windows BMC Update" by double-clicking the .EXE. - Choose "Perform Update" and click the "Next" button. - If the update is meant for the system on which it is running, the "Next" button will appear. Click the "Next" button to continue. NOTE: The MSI BMC device driver and IBM IPMI mapping layer are required to update BMC in Windows. - Click the "Exit" button. 3.2 Step by step instructions for extracting the Windows update files (GUI) - Run the "IBM eserver 326m Windows BMC Update" by double-clicking the .EXE. - Choose "Extract to Hard Drive" and click the "Next" button. - Choose a directory into which the Windows update files will be saved in the "Save As" dialog. - The files extracted are all the files that are necessary to perform a BMC update under Windows. Run "wflash -c" from a command line to update BMC on 32-bit Windows or "wflash64 -c" from a command line to update BMC on 64-bit Windows. - Click the "Exit" button. 3.3 Step by step instructions for extracting the DOS update files to diskette (GUI) - Run the "IBM eserver 326m Windows BMC Update" by double-clicking the .EXE. - Choose "Extract to Floppy" and click the "Next" button. - Place a diskette in the A: drive and press the "OK" button. - The diskette created is the DOS BMC update diskette. - Click the "Exit" button. 3.4 Step by step instructions for extracting the DOS update files to diskette (command line) - Run the "IBM eserver 326m Windows BMC Update" with the following command line: ".exe -a -xd " where .exe is the downloaded update and is the drive to which the DOS update files will be extracted. 4.0 Configuration Information 5.0 Unattended Mode 5.1 Performing the update in unattended mode - Run the "IBM eserver 326m Windows BMC Update" with the following command line: ".exe -s -a -s" where .exe is the downloaded update. NOTE: The MSI BMC device driver and IBM IPMI mapping layer are required to update BMC in Windows. 5.2 Extracting the Windows update files in unattended mode - Run the "IBM eserver 326m Windows BMC Update" with the following command line: ".exe -s -a -x " where .exe is the downloaded update and is the path to which the Windows update files will be extracted. 5.3 Running extracted Windows update files in unattended mode - Extract the Windows update files using Section 3.2 or Section 5.2 of this readme. - Run "wflash -c" from a command line to update BMC on 32-bit Windows or run "wflash64 -c" from a command line to update BMC on 64-bit Windows. 6.0 Web Sites and Support Phone Number 6.1 IBM Support Web Site: http://www.pc.ibm.com/support 6.2 IBM eserver xSeries Web Site: http://www.ibm.com/eserver/xseries 6.3 If you have any questions about this update, or problems applying the update, go to the following Help Center World Telephone Numbers and URL: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html 7.0 Trademarks and Notices THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 8.0 Disclaimer