File Name: readme.win IBM xSeries 336 Windows Diagnostics Flash Update Diskette Systems 8837/8838/1879 Version 1.07, Build ID: APYT414A CONTENTS --------- 1.0 Overview 2.0 Change History 3.0 Installation and Setup Instructions 4.0 Configuration Information 5.0 Unattended Mode 6.0 Web Sites and Support Phone Number 7.0 Trademarks and Notices 8.0 Disclaimer 1.0 Overview -------------- 1.1 Overview about this code This README file contains the latest information about installing the IBM xSeries 336 Diagnostics. 1.2 Limitations N/A 1.3 Enhancements N/A 1.4 Level of Recommendations and Prerequisites for the Update N/A 1.5 Dependencies N/A 2.0 Change History -------------------- 2.1 Version 1.07 - APYT14A - Fixed a problem where Physical Drives under Hardware Info and Fixed Disk Tests display an incorrect array size when greater than a terrabyte 2.2 Version 1.06 - APYT10A - Fixed a problem where extraneous characters were displayed during the memory test when run from a remote session 2.3 Version 1.05 - APYT09A - Fixed a problem where the normal tests could not be looped without user interaction - removed CDRW test from normal tests 2.4 Version 1.04 - APYT08A - Fixed a problem where the processor was misidentified in Hardware Info - Fixed a problem where the SCSI tape read/write self test passed when no media was present - Fixed a problem where the memory test falsely reported a failure for some fractional configurations 2.5 Version 1.03 - APYT06A - Added support for new processor - Fixed a problem where the console redirection session is dropped when the server is booted to diagnostics - Fixed a problem where the SCSI tape test failed with a DDS 5 tape drive 2.6 Version 1.02 - APYT05A - Fixed a problem where the memory test failed with a ServeRAID 6I+ card installed 2.7 Version 1.01 - APYT04A - Added support for new processor stepping level (E0) and new revision of the Broadcom Ethernet chip (B1) 2.8 Version 1.0 - APYT03A - Initial Release 3.0 Installation and Setup Instructions ----------------------------------------- 3.1 Step by step instructions for this code update (GUI) - Run the "IBM xSeries 336 Windows Diagnostics Update" by double-clicking the .EXE. - Choose "Perform Update" and click the "Next" button. - If the update is meant for the system on which it is running, the "Next" button will appear. Click the "Next" button to continue. - Click the "Exit" button. 3.2 Step by step instruction for extracting the Windows update files (GUI) - Run the "IBM xSeries 336 Windows Diagnostics Update" by double-clicking the .EXE. - Choose "Extract to Hard Drive" and click the "Next" button. - Choose a directory into which the Windows update files will be saved in the "Save As" dialog. - The files extracted are all the files that are necessary to perform a Diagnostics update under Windows. Run "wflash -d" from a command line to update Diagnostics. - Click the "Exit" button. 3.3 Step by step instruction for extracting the DOS update files to diskette (GUI) - Run the "IBM xSeries 336 Windows Diagnostics Update" by double-clicking the .EXE. - Choose "Extract to Floppy" and click the "Next" button. - For each diskette to be created, place a diskette in the A: drive and press the "OK" button. - The diskettes created comprise the DOS Diagnostics update diskette set. - Click the "Exit" button. 3.4 Step by step instruction for extracting the DOS update files to diskette (command line) - Run the "IBM xSeries 336 Windows Diagnostics Update" with the following command line: ".exe -a -xd " where .exe is the downloaded update and is the drive to which the DOS update files will be extracted. 4.0 Configuration Information ------------------------------- N/A 5.0 Unattended Mode --------------------- 5.1 Performing the update in unattended mode - Run the "IBM xSeries 336 Windows Diagnostics Update" with the following command line: ".exe -s -a -s" where .exe is the downloaded update. 5.2 Extracting the Windows update files in unattended mode - Run the "IBM xSeries 336 Windows Diagnostics Update" with the following command line: ".exe -s -a -x " where .exe is the downloaded update and is the path to which the Windows update files will be extracted. 6.0 WEB Sites and Support Phone Number ---------------------------------------- 6.1 IBM Support Web Site: http://www.pc.ibm.com/support 6.2 IBM Marketing eserver Web Site: http://www.ibm.com/eserver/xseries 6.3 If you have any questions about this update, or problems applying the update go to the following Help Center World Telephone Numbers: 800-IBM-SERV (800-426-7378) Hardware Support #: 800-426-4378 Software Support #: 800-237-5511 6.4 Website for the World Wide Support Phone list: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html. 6.5 Intellistation web site http:www.pc.ibm.com/intellistation 7.0 Trademarks and Notices ---------------------------- N/A 8.0 Disclaimer ---------------- 8.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 8.2 Note to Government Users Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.