IBM eserver xSeries 366 Remote Supervisor Adapter II Update for Windows
System 8863

Version 1.02, Build ID: ZUEP22A, Revision 16 

CONTENTS
________

1.0  Overview
2.0  Change History
3.0  Installation and Setup Instructions
4.0  Unattended Mode
5.0  Web Sites and support phone Number
6.0  Trademarks and Notices
7.0  Disclaimer


1.0  Overview
________________________



        1.1     This will update the IBM Remote Supervisor Adapter II
                software only.  It will not affect any device drivers.  
        
        1.2     Limitations

                If there is an error in loading the IBM Remote Supervisor Adapter II 
                software, retry loading the software by repeating the instructions 
                in section 3.0.

        1.3     Enhancements
                - none

        1.4.    Level of Recommendations and Prerequisites for the
                update:

                - Multi-lun support is needed in order to mount more then one remote drive 
                  simultaneously. The linux kernel 2.4.20 and later have the appropriate 
                  multi-lun support, however this support needs to be enabled at kernel 
                  build time.  Currently, only the SLES 8.0 SP3 distribution has multi-Lun 
                  support available and enabled.  RedHat AS 3.0 has a 2.4.21 kernel, but 
                  does not have multi-lun support enabled by default.  


        1.5     Dependencies:

                - none


2.0     Change History 
________________________  

IBM Remote Supervisor Adapter II Update Version 1.02, ZUEP22A 
 - Added support for machine type 8872.

IBM Remote Supervisor Adapter II Update Version 1.01, ZUEP18B 
 - Corrected Component VPD list to include all components and correctly display data.
 - Corrected the information placed in the System Event Log for some SMI Events.
 - Added support to handle IPMI sensor changes in the BMC.
 
IBM Remote Supervisor Adapter II Update Version 1.00, ZUEP16A
 - First release

3.0  Installing and Setup Instructions
______________________________________

       This utility will update the IBM Remote Supervisor Adapter II
       software under the Windows Operating System.  It requires
       the installation of the correct Remote Supervisor Adapter II for
       Windows device driver.

       3.1   Performing this code update (GUI)
       _______________________________________
       
             - Run the "IBM xSeries 366 Windows Remote Supervisory Adapter II Update"
               by double-clicking the .EXE.

             - Choose "Perform Update" and click the "Next" button.

             - If the update is meant for the system on which it is
               running, the "Next" button will appear.  Click the "Next"
               button to continue.

             - Click the "Exit" button.
             
       3.2   Extracting the Windows update files (GUI)
       _______________________________________________

             - Run the "IBM xSeries 366 Windows Remote Supervisory Adapter II Update"
               by double-clicking the .EXE.

             - Choose "Extract to Hard Drive" and click the "Next"
               button.

             - Choose a directory into which the Windows update files
               will be saved in the "Save As" dialog.

             - The files extracted are all the files that are necessary to 
               perform a RSAII firmware update under Windows.  Run "wflash -r"
               from a command line to update RSAII firmware.

             - Click the "Exit" button.

4.0     Unattended Mode
________________________

        Extracting the Windows update files (command line)
        __________________________________________________

        - Run the "IBM xSeries 366 Windows Remote Supervisor Adapter II
          Update" with the following command line:
                     
                "<update>.exe -s -a -x <path>" where <update>.exe is the
                downloaded update and <path> is the path to which the
                Windows update files will be extracted.

        - The files extracted are all the files that are necessary to 
          perform a RSAII firmware update under Windows.  Run "wflash -r"
          from a command line to update RSAII firmware.


5.0     WEB Sites and Support Phone Number
_________________________________________

        5.1     IBM Support Web Site:
                http://www.pc.ibm.com/support

        5.2     IBM eserver xSeries Web Site:
                http://www.ibm.com/eserver/xseries

        5.3     If you have any questions about this update, or
                problems applying the update, go to the following
                Help Center World Telephone Numbers and URL:
                http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html.

6.0.    TradeMarks and Notices
______________________________

        6.1     The following terms are trademarks of the IBM 
                Corporation in the United States, or other countries
                or both:
                            * IBM
                            * Advanced System Management

                Other company, product, and service names may be
                trademarks or service marks of others.

7.0.    Disclaimer
__________________

        7.1     THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
                ANY KIND.  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
                OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
                WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
                MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN
                THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
                GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.

        7.2     Note to Government users:

                Note to U.S. Government users-- Documentation related
                to restricted rights-- Use, duplication and disclosure
                is subject to restrictions set forth in GSA ADP Schedule
                Contract with IBM Corporation.