File Name: readme.txt

       Diagnostics Flash Update Diskette
       Model LS20
       
       Version 1.02, Build ID: BKYT13A



       CONTENTS
       ---------

       1.0   Overview
       2.0   Change History
       3.0   Installation and Setup Instructions
       4.0   Configuration Information
       5.0   Unattended Mode
       6.0   Web Sites and Support Phone Number
       7.0   Trademarks and Notices
       8.0   Disclaimer


       1.0   Overview
       --------------

             1.1   Overview about this code

                   This README file contains the latest information about
                   installing the LS20 Diagnostics.




             1.2   Limitations

                   N/A

             1.3   Enhancements

                   N/A

             1.4   Level of Recommendations and Prerequisites for the
                   Update

                   N/A

             1.5   Dependencies

                   N/A


       2.0   Change History
       --------------------

       [SERVICE USE   RETAIN #H183798 AI]

             2.1   Version 1.02 - BKYT13A
                    
                   - fixed a problem where single bit errors could go
		   undetected in certain configurations
        
             2.2   Version 1.01 - BKYT12A
		    
		   - temporarily removed SCSI controller test 

		   - fixed a problem where double bit errors were being
                   identified as single bit errors in the memory test  	

             2.3   Version 1.00 - BKYT11A

                   - Initial Release




       3.0   Installation and Setup Instructions
       -----------------------------------------

             3.1   Step by step instructions for this code update

                   - Insert the "POST/BIOS Flash Disk" into
                     drive A.

                   - Start up or restart your LS20.

                   - The system will boot from the diskette and present
                     a window which allows you the option to flash various
                     options.  Choose "2 - Update Diagnostic".

                   - The system will prompt you to enter the diskette
                     containing BKydiag.us1 and hit enter.  Insert the
                     "LS20 Diagnostics Flash Update Diskette 1 of 2" into
                     drive A and hit enter.

                   - After loading the image from the first diskette, the
                     system will prompt you to insert the diskette
                     containing diagnostics file $BKydiag.us2.  Insert the
                     "LS20 Diagnostics Flash Update Diskette
                     2 of 2" into drive A and hit enter.

                   - After the second image is loaded from diskette the system
                     will ask you to wait while the images are flashed into
                     ROM.  When this is complete you will be prompted to
                     remove the diskette and hit enter to restart the system.

             3.2   Other

                   N/A


       4.0   Configuration Information
       -------------------------------

             N/A


       5.0   Unattended Mode
       ---------------------

             5.1   Steps for unattended mode

                   - Boot to DOS

                   - Copy flash2.exe from the "POST/BIOS Flash
                     Disk", this readme.txt file,  and all *.us* files
                     from the "LS20 Diagnostics Flash Update Diskettes"
                     to the same directory on some media capable of
                     storing 2.5MB of data

                   - From the directory just copied to, run
                     "flash2.exe /u /d"


       6.0   WEB Sites and Support Phone Number
       ----------------------------------------

             6.1   IBM Support Web Site:
                   http://www.pc.ibm.com/support

             6.2   IBM Marketing eserver Web Site:
                   http://www.ibm.com/eserver/xseries

             6.3   If you have any questions about this update, or problems
                   applying the update go to the following Help Center World
                   Telephone Numbers: 800-IBM-SERV (800-426-7378)
                   Hardware Support #: 800-426-4378
                   Software Support #: 800-237-5511

             6.4   Website for the World Wide Support Phone list:
                   http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html.

             6.5   Intellistation web site
                   http:www.pc.ibm.com/intellistation

       7.0   Trademarks and Notices
       ----------------------------

             7.1   The following terms are trademarks of the IBM Corportation
                   in the United States or other countries or both:

                   - IBM

                   - xSeries 	

                   - Netfinity

                   - Intellistation

                   - PC Server

                   - BladeCenter

              7.2  Other company, product, and service names may be 
                   trademarks or service marks of others.  


       8.0   Disclaimer
       ----------------

             8.1   THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
                   ANY KIND.   IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
                   OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
                   WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
                   MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
                   DOCUMENT.   BY FURNISHING THIS DOCUMENT, IBM GRANTS NO
                   LICENSES TO ANY PATENTS OR COPYRIGHTS.


             8.2   Note to Government Users

                   Note to U.S. Government Users -- Documentation related to
                   restricted rights -- Use, duplication or disclosure is
                   subject to restrictions set forth in GSA ADP Schedule
                   Contract with IBM Corporation.