IBM Netfinity PCI Hot Plug for Windows NT V4.0 - 10/100 Fault Tolerant Ethernet Adapter Device Drivers V4.04.000 *********************************************************************** * * * This diskette contains IBM* Hot-Plug PCI System Support Program * * for Microsoft** NT V4.0 * * Device Driver, Support Files, and Supported Hot-Plug PCI drivers * * * *********************************************************************** 1. What is the IBM PCI Hot Plug Solution? The IBM PCI Hot Plug solution for Windows NT 4.0 ensures High Availability on PCI Hot Plug-compatible IBM servers. With IBM PCI Hot Plug, you can use: * Hot Add to install and configure a new adapter while the system is running. * Hot Swap to replace a faulty standalone or redundant adapter while the System is running. * The IBM PCI Hot Plug Applet--to monitor the status of Hot Plug PCI slots on your server. IBM PCI Hot Plug includes two wizards, IBM PCI Hot Plug and Play and IBM PCI Hot Swap. These wizards provide clear, step-by-step guidance while you are adding or swapping an adapter. --------------------- Hardware Requirements --------------------- IBM PCI Hot Plug systems such as the IBM Netfinity 5500. --------------------- Software Requirements --------------------- * Microsoft Windows NT 4.0 SP3 or later * IBM PCI Hot Plug Package which includes: + IBM Fault Tolerant DMI agent--This agent automatically installs DMI services on your system. + IBM Hot Plug Solutions - IBM PCI Hot Plug Applet - IBM PCI Hot Plug and Play Wizard - IBM PCI Hot Swap Wizard + Hot Plug Adapters Software - IBM Netfinity 10/100 Fault Tolerant device driver - IBM Fault Tolerant ServeRAID II device driver You can download the DMI agent and the IBM PCI Hot Plug software from www.ibm.com/pc/support/netfinity. ------------------------------- Hardware Supported for Hot Plug ------------------------------- Hot Add -IBM Netfinity 10/100 Fault Tolerant -IBM Fault Tolerant ServeRAID II Hot Swap -IBM Fault Tolerant ServeRAID II Fault Tolerant Pair Hot Swap -IBM Netfinity 10/100 Fault Tolerant -IBM Fault Tolerant ServeRAID II Please ask your IBM representative for other supported adapters. 2. IBM PCI Hot Plug Installation You must use the following software to provide IBM PCI Hot Plug support for hot plug-capable IBM Netfinity systems. You can download this software from www.ibm.com/pc/support/netfinity. Install the following software in that order: - IBM Fault Tolerant DMI Agent - IBM PCI Hot Plug Services - IBM Fault Tolerant Device Drivers --------------------------------------- Installing IBM Fault Tolerant DMI agent --------------------------------------- This software will install DMI version 2.0 on your system. You must install the DMI agent before you can install the IBM PCI Hot Plug Services. If DMI is already installed on your system, proceed to Installing IBM PCI Hot Plug Services later in this document. 1. Download the DMI exe file from the Netfinity Support web page and extract the files onto a diskette. 2. Insert the diskette into the floppy drive. 3. From the Start menu, select Run. 4. Type A:\SETUP.EXE in the Open box. 5. Click OK. The Setup wizard opens. 6. Follow the instructions on the setup wizard until the program is installed. 7. Reboot ------------------------------------ Installing IBM PCI Hot Plug Services ------------------------------------ 1. Download the IBM PCI Hot Plug Services exe file from the Netfinity Support web page and extract the files onto a diskette. 2. Log in to Windows NT as a user in the Administrator group. 3. Insert the diskette into the floppy drive. 4. From the Start menu, Select Run. 5. Type A:\SETUP.EXE in the Open box. 6. Click OK. The Setup wizard opens. 7. Follow the instructions on the setup wizard until the program is installed. NOTES: * If you have an older version of IBM PCI Hot Plug Services on your system a message box will prompt you to upgrade. Click Yes and the Setup wizard will guide you through the rest of the installation. ------------------------------------- Installing Hot Plug Adapters Software ------------------------------------- NOTE: In order to support any of the Hot Plug features, you must install the Fault Tolerant drivers. If you already have an IBM Netfinity 10/100 Fault Tolerant or IBM Fault Tolerant ServeRAID II adapter configured on your system, those drivers must be removed and replaced with the latest Fault Tolerant drivers. A reboot will be required. 1. Download the fault tolerant driver files from the IBM Netfinity Support web page and extract the files onto a diskette. 2. Place the diskette into the floppy drive. 3. Proceed with the normal upgrade of the adapter drivers. See your Windows NT documentation for information about upgrading drivers. Note: During the setup of a Fault Tolerant pair of IBM Netfinity 10/100 Fault Tolerant adapters, the "Enabled for DMI / Hot Plug Support" box must be checked. Not checking this box will prevent a Hot Swap of these adapters. 4. Reboot ----------------------------------------------- Tips to Know before using PCI Hot Plug features ----------------------------------------------- 1. Hot Plug Drivers In order to support any of the Hot Plug features, you must install the Fault Tolerant drivers. If you already have an IBM Netfinity 10/100 Fault Tolerant or IBM Fault Tolerant ServeRAID II adapter configured on your system, those drivers must be removed and replaced with the latest Fault Tolerant drivers. A reboot will be required. 2. IBM Netfinity 10/100 Fault Tolerant Driver Configuration To setup an IBM Netfinity 10/100 Fault Tolerant Driver Configuration to work with DMI or Hotplug two reboots are required. The driver must be installed once in a DMI enabled system with the adapter's property page "Grouped" box NOT checked. Reboot the machine. After this boot, in order to setup a Fault Tolerant pair on the IBM Netfinity 10/100 Fault Tolerant Driver Configuration both the adapter's property page "Group" and "Enabled for DMI / Hot Plug Support" boxes checked. Reboot the machine. Review the documentation that comes with the driver for other installation information. Note:If the "Enabled for DMI / Hot Plug Support" box is NOT checked,the administrator will not be able to Hot Swap the adapters. 3. Hot Add of an Adapter previously removed When an administrator attempts to Hot-Add a Raid or SCSI adapter on a Hot Plug system which has already had the adapter installed on it and then removed, the Hot Add will fail. The administrator is strongly advised to mark all SCSI drivers which have no device as "DISABLED" via the Devices Control Applet. This will prevent the driver from being started and allow the Hot Add to proceed normally. 4. MAC address incorrect (all zeros) for Hot Added card After a Hot Add of a NIC Card, the MAC addresses are being returned as all zeros (000000000000). This does not affect the abilities of the adapter. 5. Hot Remove This feature is NOT supported. 6. Best Time to perform PCI Hot Plug action It is highly recommended to perform any of the PCI Hot Plug features during low traffic. 7. Reboot Message After an Hot Add of an adapters, the Windows NT applications (Network Applet and SCSI Applet) will ask the user for a Reboot. DO NOT REBOOT 8. Hot Swap of ServeRAID II During a Hot Swap of a stand alone ServeRAID II adapter, any I/O performed on the adapter during this operations will be failed. Error messages might appear. 9. CanĘt open both IBM PCI Hot Plug Applet and IBM PCI Hot Swap Wizard at the same time. ------------------------------------ Trademarks and Service Marks ------------------------------------ The following terms, denoted by an asterisk (*) in this README, are trademarks or registered trademarks of the IBM Corporation in the United States or other countries: ------------------------------------------ IBM ------------------------------------------ NetFinity ------------------------------------------ ServeRAID ------------------------------------------ The following terms, denoted by a double asterisk (**) in this README, are trademarks of other companies as follows: Trademark: Owner: -------------------------------------------------------------- Windows NT Microsoft, Inc. -------------------------------------------------------------- THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.