File Name: readme.TXT

       Adaptec Ultra 160 driver for Windows NT 4.0 version d3.6

       CONTENTS
       ---------

       1.0   Overview
       2.0   Change History	
       3.0   Installation and Setup Instructions
       4.0   Configuration Information
       5.0   Unattended Mode
       6.0   Web Sites and Support Phone Number
       7.0   Trademarks and Notices
       8.0   Disclaimer


       1.0   Overview
	-----------------------------------------

	     Diskette Contents 

The following files are included in this diskette: 

 \Readme.txt			Readme file for this diskette
 \Readdos.txt			DOS CDROM Driver Info
 \fixes.txt			Fixes in this version
 \U160DSK1			Disk identifier file
 \TXTSETUP.OEM	 		Install script used during NT 4 installation                                 	                          
 \NT4\Ultra160\ADPU160M.SYS	Ultra160 series driver for Windows NT 4
 \NT4\Ultra160\ADPU160M.INF	Install script used by Windows NT 4 Setup                            
 \NT4\Ultra160\HOTP160M.REG	Registry file to enable Hot-Plug PCI feature                           


  Level of Recommendations and Prerequisites for the Update:
- A full backup should be completed and verified, prior to updating this, or any other system update
	
       2.0   change History
      -----------------------------------------	
    	     N/A
   

       3.0   Installation and Setup Instructions
       -----------------------------------------
	3.1 Completing a Fresh Windows NT v4.0 Installation from Floppy Disk 

The following instructions explain how to install the Adaptec Ultra160 Family Manager Set, while installing Windows NT v4.0. 

1. Start your system with the Windows NT Boot Diskette in the floppy drive. 

2. Insert diskette #2 when prompted.  After a few moments you will see a blue screen. To setup Windows NT now, press ENTER.

3. Press S to skip Windows NT Setup's auto detection of your SCSI adapter. 

4. Press S again to specify an additional device. 

5. Press ENTER to select Others, and insert the Adaptec Ultra160 Family Manager Set diskette. 

6. Use the arrow keys to highlight and select the desired driver, then press Enter. 

7. If you want to add other host adapters (that are not a part of the Ultra160 Family), 											                do so at this time by pressing 'S' and repeating step 5 for each additional adapter and 								                inserting the appropriate disk provided by the hardware manufacturer.  The Adaptec 										                Ultra160 Family host adapters use the same driver; it is not necessary to install the 												ADPU160M.SYS driver again. 

8. Press ENTER to continue with the Windows NT operating system setup.  Follow the instructions given on screen and in the Windows NT installation documentation. 


	3.2  Updating the Adaptec Driver under Windows NT v4.0 

Follow these instructions only if Windows NT v4.0 is already installed. 

1. Click the Start button on the Windows NT task bar, and the point to Settings. 

2. Open the Control Panel, double-click on SCSI Adapters. 

3. Select the Drivers tab, and click the Add button. 

4. In the "Install Driver" window, click the Have Disk button. 

5. Insert the Adaptec Ultra160 Family Manager Set for Windows NT diskette. 

6. At the "Copy manufacturer's files from" text box, type a:\nt4, and click OK. 

7. At the Install Driver window, select the driver, then click OK. 

8. In response to "Do you want to use the currently installed driver(s) or install new one(s)", select the New button. 

9. Type a:\nt4 and click continue.  The driver is now installed. 

10. You must restart your computer for the changes to take effect.  Click Yes to restart your computer.  Click No to return to the SCSI Adapters window. 

             

       4.0   Configuration Information
       -------------------------------

          	N/A

       5.0   Unattended Mode
       -------------------------------
         	N/A

	6.0   WEB Sites and Support Phone Number
	----------------

	6.1	IBM Support Web Site:
        
		http://www.pc.ibm.com/support

	6.2	IBM Marketing EServer Web Site:

		http://www.pc.ibm.com/ww/eserver/xseries/

	6.3   	If you have any questions about this update, or problems
		applying the update go to the following Help Center World
		telephone Numbers URL:

		http://www.ibm.com/planetwide/



       7.0   Trademarks and Notices
       ----------------------------

                N/A



       8.0   Disclaimer
       ----------------------------

             8.1   THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
                   ANY KIND.   IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
                   OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
                   WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
                   MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
                   DOCUMENT.   BY FURNISHING THIS DOCUMENT, IBM GRANTS NO
                   LICENSES TO ANY PATENTS OR COPYRIGHTS.


             8.2   Note to Government Users
                   Include the following note after the disclaimer paragraph.

                   Note to U.S. Government Users -- Documentation related to
                   restricted rights -- Use, duplication or disclosure is
                   subject to restrictions set forth in GSA ADP Schedule
                   Contract with IBM Corporation.