IBM eServer 326 BMC Flash Update Version M2 1.06 - Build M2ET06A Installation README File CONTENTS ________ 1.0 Overview 2.0 Change History 3.0 Installation and Setup Instructions 4.0 Configuration Information 5.0 Unattended Mode 6.0 Web Sites and Support Phone Number 7.0 Trademarks and Notices 8.0 Disclaimer 1.0 Overview 1.1 This README file contains the latest information about installing the IBM BMC code. 1.2 Limitations - NA 1.3 Enhancements - NA 1.4 Level of Recomendations and Prerequisites for the Upate: 1.5 Dependencies 2.0 Change History =============================================== MS-9549 BMC Firmware Release Notes Version: M2 1.06 =============================================== BIOS Version: M2 1.06 Broadcom FW Version: Bootcode: 3.27, PT: 2.25 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9145 HW Version: 3.0 ------------------------------------------------------------ Modification ------------------------------------------------------------ - Fix : OS watchdog timer causes WS03 to reboot when in S1 =============================================== MS-9549 BMC Firmware Release Notes Version: M2 1.05 =============================================== BIOS Version: M2 1.05 Broadcom FW Version: Bootcode: 3.27, PT: 2.25 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9145 HW Version: 3.0 ------------------------------------------------------------ Modification ------------------------------------------------------------ - Fix : No SNMP Alert for Hard Shutdown =============================================== MS-9549 BMC Firmware Release Notes Version: M2 1.04 =============================================== BIOS Version: M2 1.03 Broadcom FW Version: Bootcode: 3.27, PT: 2.25 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9145 HW Version: 3.0 ------------------------------------------------------------ Modification ------------------------------------------------------------ - New CPU Temperature Threshold for CG Processor A. CPU Speed is 2.0 GHz and below for Non-CG CPU Type Threshold CPU Diode Temperature --------------+--------------------------- Warning 92 degree C Soft Shutdown 97 degree C Hard Shutdown 102 degree C B. CPU Speed is above 2.0 GHz for Non-CG CPU Type Threshold CPU Diode Temperature --------------+--------------------------- Warning 94 degree C Soft Shutdown 99 degree C Hard Shutdown 104 degree C C. CPU Type is CG (This is only for DE re-flash V3.0) Threshold CPU Diode Temperature --------------+--------------------------- Warning 85 degree C Soft Shutdown 90 degree C Hard Shutdown 95 degree C =============================================== MS-9549 BMC Firmware Release Notes Version: M2 1.03 =============================================== BIOS Version: M2 1.03 Broadcom FW Version: 2.16 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9145 HW Version: 3.0 ------------------------------------------------------------ Modification ------------------------------------------------------------ - Fix Over Voltge Alert: Firmware generates event by voltage reading which is averaged 10 voltage readings. - Fix Unnecessary Over High Temperature Alert: Plug AC power cord and power on system, FW generates Sensor#33(CPU 2 Temp) SEL and Alert. - Fix Unnecessary BIOS Stepping Detection SEL: Plug AC power cord and power on system, FW generates Sensor#93(Stepping Detect) SEL. - Update Fan Speed Control by defect 253156(Fan speed table needs to be updated) Need Fan Speed Control table modified to allow for better system acoustics. Table A (If T_a <=25 deg C) CPU Diode Based Fan Control for Opteron CG-Stepping Level Processors CPU Diode Temp (C) Fan Speed (rpm) < 60 8000 61-64 9000 65-69 10000 70+ 11000 Table B (if T_a > 25 deg C) Ambient Temp Settings Ambient Temp (C) Fan Speed (rpm) (Will need to refine this table post SDVTests) 26-28 10000 29-31 12000 32-34 14000 35+ 15000 - Fix defect (Incorrect data in SDR for e326) Revise Byte 9 of SDR record 0x0000(Record type 12h) as DFh. =============================================== MS-9549 BMC Firmware Release Notes Version: M2 1.02 =============================================== BIOS Version: M2 1.01 Broadcom FW Version: 2.16 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9145 HW Version: 3.0 ------------------------------------------------------------ Modification ------------------------------------------------------------ - Fix defect : e326: No SNMP for HDD add/remove =============================================== MS-9549 BMC Firmware Release Notes Version: M2 1.01 =============================================== BIOS Version: M2 1.01 Broadcom FW Version: 2.16 Update Utility Version: U162 MS-9549 HW Version: 1.1 MS-9145 HW Version: 3.0 ------------------------------------------------------------ Modification ------------------------------------------------------------ - Firmware M2 1.01 is based on DE Firmware 1.38. - Add 2 bytes(13th and 14th) at end of Response Data of "Get Device ID Command" to indicate this Firmware is for M2. 13th byte is 4Dh(ASCII Code: M) and 14th byte is 32h(ASCII Code: 2). - Modify Product ID as 8848 for e326 - Support CG Processor and 8 DIMM - Support New Fan Speed Control Algorithm for CG Processor and 8 DIMM Planar 3.0 Installation and Setup Instructions The procedure to update the BMC is as follows: 3.1 Insert the "IBM BMC Flash Update" diskette into a bootable diskette drive. 3.2 Start up or restart your IBM system. 3.3 The system will boot off of the update media and automatically update the system BMC. 4.0 Configuration Information 5.0 Unattended Mode This update utility does not support unattended installations but there are other ways to incorporate unattended installations of this code. Check the UpdateXpress CD for availability of unattended installs of this firmware. (The UpdateXpress CD is downloadable from http://www.ibm.com (use the search function to find "UpdateXpress"). 5.1 Steps for unattended mode - Boot to DOS - Create a directory for your BMC flash files. - Copy the following files from the"IBM eSeries 326 BMC Baseboard Management Contoller Flash Disk" to the same directory on some media capable of storing 2.5MB of data. - "update.bat" "fw162.exe" "config.bin" "recvruty.exe" "recovery.set" "code.bin" "sdrr.bin" "config.bin" "tool.exe" "de.bat" "prefix.txt" - From the directory just copied to, run "update.bat" 6.0 Web Sites and Support Phone Number 6.1 IBM Support Web Site: http://www.pc.ibm.com/support 6.2 IBM eserver xSeries Web Site: http://www.ibm.com/eserver/xseries 6.3 If you have any questions about this update, or problems applying the update, go to the following Help Center World Telephone Numbers and URL: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html 7.0 Trademarks and Notices THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 8.0 Disclaimer