Windows Server 2003 Half-High LTO Device Drivers Version 1.0.2.0
09/14/2004

Table of Contents:
Introduction
Change history
How to use and deploy the device drivers
Summary


Introduction:
This document contains instructions for use and installation of the device driver for Windows 2003
for 32-bit and 64-bit operations for the IBM 59P6658 100/200GB Half Height LTO.

Change history: Version 1.0.2.0

- Certified Release Version 1.0.2.0 - Initial Windows Server 2003 build for 32-bit and 64-bit.

How to use and deploy the device drivers:
1.  After installing the 100/200GB HHLTO hardware boot the server to the Windows Server 2003 desktop.
2.  The Windows Device Manager should sense that a new piece of hardware has been detected and prompt for a device driver to be installed.
3.  Select the button that indicates to search for the device driver.
4.  Use the Browse selection and direct the operation to the location where the driver was downloaded to and resides.
5.  Select the .inf file and the installation process will complete.
6.  No reboot is required the device is ready to use.

Summary:
Any questions or concerns with installation or use of these device drivers can be directed to IBM via the customer support process.  Help is available at www.pc.ibm.com/support or by calling 800-772-2227.