Broadcom Firmware Update Utility for BCM5700-based servers. Copyright (c) 2000, 2001, 2002 Broadcom Corporation All rights reserved. February 26, 2003 This package performs an update of the BCM5700 ethernet firmware. This package will set the firmware level version 2.16. CONTENTS ________ 1.0 Limitations 2.0 Change History 3.0 Installation and Configuration 4.0 Web Sites and Support Phone Number 5.0 Trademarks and Notices 6.0 Disclaimer 1.0 Limitations _________________ This code only applies to the xseries 440 server. This code must be run from a native DOS prompt. It will not run in a DOS window. 2.0 Change History _____________________ Changes made in this diskette, version 2.16: 1. Program all MacAddr Registers with the MacAddress in NVRAM 2. Propagate Wake On LAN (WOL) setting to driver on device reset. 3. Disable WOL when a system without auxiliary power is detected. - version 2.14, initial IBM release 3.0 Installation and Configuration ____________________________________ Boot the x440 server to DOS. This update will not run in a DOS window. The batch file, UPDATE.BAT, can be invoked via command line options. It upgrades the ethernet firmware of the selected ethernet device. The UPDATE.BAT usage is as follows: UPDATE [Device_Number] where: Device_Number: Broadcom device to program, starting with 0 default is device 0 (first device scanned) Example 1: to update the firmware of the second ethernet port: UPDATE 1 Example 2: to update the firmware of the first ethernet port: UPDATE 4.0 WEB Sites and Support Phone Number ________________________________________ IBM Support Web Site: http://www.pc.ibm.com/support IBM Marketing eserver xSeries Web Site: http://www.pc.ibm.com/us/eserver/xseries/ If you have any questions about this update, or problems applying the update go to the following Help Center World Telephone Numbers URL: http://www.pc.ibm.com/planetwide. 5.0 Trademarks and Notices ____________________________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM eserver xSeries Broadcom is a registered trademark of Broadcom Corporation. Other company, product, and service names may be trademarks or service marks of others. 6.0 Disclaimer _______________ THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.