V4.0 NT 4.0 Drivers Disk with 5.00.66.0000 ndis4 driver for
IBM 10/100 Ethernet Server and Desktop Adapters family
===========================================================


CONTENTS
--------

1.0   Overview
      1.1   Limitations
2.0   Change History
3.0   Build and Installation Instructions
4.0   Configuration Information
      4.1 Driver Parameters
      4.2 Additional Configuration Information
5.0   Web Sites and Support Phone Number
6.0   Trademarks and Notices
7.0   License and Disclaimer


1.0  Overview
_____________

This package includes the NT 4.0 ndis4 driver ver 5.00.66.0000
for all IBM Intel-based 10/100 Ethernet Server and Desktop NICs
and LOMs, including the latest IBM 10/100 Ethernet Server Adapter
PN 06P3601.
This driver is fully Microsoft certified under MID 34582.

1.1   Limitations
-----------------

This drivers software requires Microsoft Service Pack 5 or
later for NT 4.0 installation.


2.0   Change History
____________________


This new v4.0 sw release replaces the current v3.72 sw release.
With v4.0 sw release, IBM 10/100 Ethernet Adapters sw shares the 
same drivers names with Intel retail sw for PRO/100 family.

v4.0  E100BNT.SYS  5.00.66.0000

v3.72 IBMFENT.SYS  4.02.35.0000


3.0   Build and Installation Instructions
_________________________________________

1) Make sure the adapter is physically installed in your server
or work station prior to installing the driver software.

2) Verify that your Windows NT system is upgraded with Service  
Pack 5 or later.

3) After logging in to NT 4.0, go to Network then Adapters 

4) Select Add and click on Have Disk

5) Enter A: for the source of the drivers ( or the CD-ROM drive
if you are using the software CD ) and click OK.

6) Follow the steps on your screen to install the drivers.

7) When completed, the adapter should then show up on the Network
Adapters list.

8) When drivers installation is completed, if you are installing
multiple adapters and want to set up a failover team, then go to
Propeties and Right Click on one of the adapters. Then follow the
steps for creating an adapter team.

9) Click on Close and assign IP address either static or dynamic.

10) Reboot your system.


4.0   Configuration Information
_______________________________

After following 3.0 above, your adapter should be all set to go.
If you need further details, please see the guide.pdf available
from this web site or from the sw CD - or go to the \info dir of
the sw CD.


4.1 Driver Parameters
---------------------

Refer to 4.0 above.


4.2 Additional Configuration Information
----------------------------------------

Refer to 4.0 above.


5.0   WEB Sites and Support Phone Number
________________________________________


IBM Support Web Site:
   http://www.ibm.com/pc/support

IBM Marketing Netfinity Web Site:
   http://www.ibm.com/pc/netfinity ( or eServer xSeries )

If you have any questions about this update, or problems applying the
update go to the following Help Center World Telephone Numbers URL:
   http://www.ibm.com/pc/qtechinfo/YAST-3P2QLY.html.


6.0   Trademarks and Notices
____________________________


The following terms are trademarks of the IBM Corporation in the
United States or other countries or both:

IBM
Netfinity
eServer xSeries

Intel is a registered trademark of Intel Corporation.

Other company, product, and service names may be trademarks or
service marks of others.


7.0  License and Disclaimer
___________________________

Copyright (c) 1999-2000, IBM Corporation

All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:

1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in
   the documentation and/or other materials provided with the
   distribution.

3. Neither the name of IBM Corporation nor the names of its
   contributors may be used to endorse or promote products derived
   from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.