IBM eserver xSeries 205 Remote Supervisor Adapter II Update Diskette Readme.txt for Windows Version 1.00 System 8480 CONTENTS ________ 1.0 Overview 2.0 Change History 3.0 Unattended Mode 4.0 Web Sites and support phone Number 5.0 Trademarks and Notices 6.0 Disclaimer 1.0 Overview ________________________ This utility will update the IBM Remote Supervisor Adapter II software under the Windows Operating System . It requires the installation of the correct Remote Supervisor Adapter II for Windows device driver. 1.1 To use this utility, perform the following steps: a). Copy filename.exe (where filename is the name of the file that you downloaded) to a temporary directory on the hard disk. Run filename.exe from a command line window. Several files will be extracted and placed in the directory where filename.exe is located. b). In this directory, at the command prompt, type WFLASH -r Text will scroll across the console screen while the update process is occurring. The update process could take up to ten minutes to complete. c). When the utility is finished with the update, the text will stop scrolling across the console screen and the adapter will be restarted. The successful update ends with the text "Rebooting RSA...done". d). Remove any diskette from the diskette drive and the system is ready for use again. 1.2 Limitations If there is an error in loading the IBM Remote Supervisor Adapter II software, ensure that the file Ibmspw.dll is installed in system32 subdirectory below the Windows directory. Repeat the instructions in section 1.1. 1.3 Enhancements 1.4. Level of Recommendations and Prerequisites for the update: - A full tape backup should be completed and verified prior to running this, or any other system upgrade. - RAID configuration should be saved to a diskette: see the "Hardware Maintenance Manual" for more details. 1.5 Dependencies: - none 2.0 Change History ________________________ IBM Remote Supervisor Adapter II Installation Utility Version 1.00 - First release 3.0 Unattended Mode ________________________ Once the files are extracteed from filename.exe, the flash update can be completed by running WFLASH -r at the command prompt. 4.0 WEB Sites and Support Phone Number _________________________________________ 4.1 IBM Support Web Site: http://www.pc.ibm.com/support 4.2 IBM eserver xSeries Web Site: http://www.ibm.com/eserver/xseries 4.3 If you have any questions about this update, or problems applying the update, go to the following Help Center World Telephone Numbers and URL: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html. 5.0. TradeMarks and Notices ______________________________ 5.1 The following terms are trademarks of the IBM Corporation in the United States, or other countries or both: * IBM * Netfinity * Netfinity Manager * Advanced System Management Other company, product, and service names may be trademarks or service marks of others. 6.0. Disclaimer __________________ 6.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 6.2 Note to Government users: Note to U.S. Government users-- Documentation related to restricted rights-- Use, duplication and disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.