LSI SCSI Driver Update

This code is BETA. It is currently in test.
There are no known defects as of 8/16/2002
This code will go official (GA) by 8/30/2002


This BETA procedure will update the Windows 2000 LSI SCSI driver to version 1.08.12. This driver corrects the issues with hot-swap drives and ServeRAID Manager. 

Procedure:

1) Verify that the system has been updated to Flash BIOS version 1.02 or greater.
2) Download the LSI Driver diskette creation program, LSIUP12.exe.
3) Run the program to create the update diskette.
4) Run the LSIUP12.BAT batch file located on the update diskette
5) The program will require approximately 1 minute to run
6) The program will present a dialog box "Would you like to reboot to apply changes?"
7) Reply YES

The update program will update the driver and restart the server.  

Use the following procedure to validate correct operation:

1) Open Device Manager.
2) Expand the SCSI and RAID controllers Group.
3) Right click on the 'LSI Logic 1020/1030 Ultra 320 SCSI Adapter' entry; then, select 'Properties'
4) Click on the Driver Tab. (Ignore the indication that 1.08.04 is installed)
5) Select the Driver Details button.
6) Verify that the File Version indicates 1.8.12.00.