---------------------------------------------------- WCGDRV 3Dlabs Wildcat PRO Display Driver for Windows NT Workstation ---------------------------------------------------- ------------- Legal Notices ------------- Copyright 1999-2001, 3Dlabs Inc. Ltd. All rights reserved. Including software, file formats, and audio-visual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of 3Dlabs and/or third parties which is protected by copyright and trade secret law and may not be provided or otherwise made available without proper authorization. Restricted Rights Legend Use duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c) (1) and (2) of Commercial Computer Software -- Restricted Rights at 48 CFR 52.227-19, as applicable. Unpublished -- rights reserved under the copyright laws of the United States. Heidi(r) is a registered trademark of Autodesk, Inc. 3D Studio Max(r) is a registered trademark of Autodesk/Discreet. Intel(c) product names and logos are the property of Intel Corp. Microsoft(c) product names and logos are the property of Microsoft Corp. 3Dlabs(c) product names and logos are the property of 3Dlabs Inc. Ltd. -------------------- End of Legal Notices -------------------- ------------------- Version Information ------------------- Product: WCGDRV Version: 04,04,01,03 Date: 17-JUL-2001 Description: The 3Dlabs Wildcat PRO Display Driver provides support for accelerated high-resolution, true color graphics using OpenGL. This driver supports multi-frequency video monitors, including DDC capable Monitors. This driver supports the following languages: English, French, German, Japanese, Korean, Simplified Chinese, Spanish, and Traditional Chinese. If the currently installed Windows NT language is not one of the above choices, the installation will default to English. This release of the Wildcat PRO Display Driver will only install and run on systems running Windows NT 4.0 with Service Pack 5 (or later). NOTE: If you have Service Pack 4 and the Intel Streaming SIMD extensions installed, and upgrade to Service Pack 5 or later, you must uninstall the Streaming SIMD extensions before installing the service pack. Reference the support information at the following Web page: http://support.intel.com/support/processors/pentiumiii/ntdriver.htm Heidi(r) and 3D Studio Max(r) driver packages are included with this release on separate disks. For information on installing the Heidi(r) and 3D Studio Max(r) drivers, see the readme.txt files included on those disks. -------------------------- End of Version Information -------------------------- Installation Help ================= This driver will not run on any machine that does not have PCI backplane hardware. The Wildcat Pro Display driver will work with both AGP and AGP Pro versions of the Wildcat Display adapter. See MANIFEST.TXT for a list of delivered files. Please refer to the installation documentation provided with the media supplied with your system. If you are installing an updated driver from the 3Dlabs web site, please do the following: 1. Save the self-extracting .zip file to a temporary directory on the system hard drive. 2. Double-click the self-extracting zip file to unzip the driver files. The extracted drivers files are compressed and will be expanded as they are installed using Windows NT 4.0 Setup. WINDOWS NT 4.0 SETUP - PLEASE READ CAREFULLY! --------------------------------------------- All previous versions of the display driver labeled, "Intergraph Display Driver", "Intense3D Display Driver", "Intense3D Intense4kDrv Display Driver", "Intense Wildcat Driver", "3Dlabs Wildcat Driver", and "Wildcat Driver" should be uninstalled prior to loading the "3Dlabs Wildcat PRO Display Driver". See the Uninstall Help section for step-by-step instructions on uninstalling these drivers. To install the 3Dlabs Wildcat PRO Display Driver: 1. Log into the system using an account that has Administrator privileges. 2. From the operating system Start menu, go to Settings/Control Panel and double-click Display to activate the Display Properties dialog. 3. Click the Settings tab. 4. Click the Display Type button to activate the Display Type dialog. 5. Click the Change button to activate the Change Display dialog. 6. Click the Have Disk button to activate the Install From Disk dialog. 7. Clear the default path, A:\, and click Browse to activate the Locate File dialog. Using the Locate File dialog, find the directory that contains the extracted driver files. Locate and select the file, oemsetup.inf, in the disk1 sub-directory and click Open. The Locate File dialog will dismiss and the Install From Disk dialog will become active. Select OK in the Install From Disk dialog. 8. Another dialog labeled Change Display will appear listing the title of the driver to be installed. Verify that 3Dlabs Wildcat PRO is highlighted and click OK. 9. A dialog labeled "Third-party Drivers" will appear prompting you to proceed with the installation of a third-party driver. Click YES. 10. During the installation, a dialog labeled "Files Needed" will appear and indicate that an additional file is needed. The default path will be the same as the path selected in step 7. 11. Click Browse and locate the disk2 sub-directory. Select the needed file and click Open. Then click OK in the Files Needed dialog. 12. A dialog box labeled Installing Driver should appear indicating that the drivers were successfully installed. Click OK. 13. Click Close in the Display Type dialog. 14. Click Close in the Display Properties dialog. 15. A final dialog will appear and state the system settings have been changed and that you must restart your computer in order for the new settings to take effect. Click Yes in order to reboot the system. 16. The Wildcat PRO Display Driver will be loaded during system boot and display at the 640 x 480 resolution. However, if an earlier version of the Intense3D or 3Dlabs Wildcat Driver was previously installed, the resolution will be the last one selected with that driver. After logging on again, the resolution can be changed in the Display Properties dialog. 17. Following the system shutdown and subsequent logon, a dialog will appear stating that the current settings are invalid. This dialog appears the first time you logon after you have changed the display driver. Click OK and configure the display settings to meet your requirements. Automated Installation Help =========================== NOTE: Make sure you have Windows NT Administrator privileges and write permission on the target machine, as the automated installation will create temporary directories on its hard drive. 1. Create an installation directory on your hard drive and then copy all installation files into that directory. You may either create a directory structure having a disk1, disk2 format, or copy all files from disk1 and disk2 into the same directory. NOTE: Do not copy files from disk3 or disk4 into the directory. Disk3 and disk4 contain the Heidi(r) and 3D Studio Max(r) driver installations, respectively. 2. Modify the setup.ini file to meet your specifications. 3. Run setup.exe. 4. Reboot the system. Unattended Installation Help ============================ Unattended installation allows you to install the driver as part of a Windows NT 4.0 installation with no end user interaction. These instructions assume a working knowledge of Windows NT 4.0 unattended installations. The 3Dlabs Wildcat requires Windows NT 4.0 Service Pack 5 or higher. For the unattended installation to work properly with the 3Dlabs Wildcat, you must replace the HAL files at your distribution point with HAL files from Windows NT 4.0 Service Pack 5. These files include halmps.dll, halapic.dll, and halmpsm.dll. WINDOWS NT 4.0 UNATTENDED INSTALLATION -------------------------------------- 1. Add the following entries to the unattended.txt file: [Display] ConfigureAtLogon=0 BitsPerPel = 32 XResolution = 1024 YResolution = 768 VRefresh = 75 AutoConfirm=1 InstallDriver=1 InfFile=oemsetup.inf InfOption="3Dlabs Wildcat Pro" NOTE: BitsPerPel, XResolution, YResolution, and VRefresh are all variable. These values can be set to any valid Display Driver setting. NOTE: InfOption is variable. It has a matching value in the oemsetup.inf file. This matching value can be found under [Wildcat.Mfg] on the left side of the = sign. These two values must match exactly. 2. Copy all display driver files to the $OEM$\DISPLAY folder of the distribution point. Any files on multiple installation disks should be copied to this folder. Uninstall Help ============== To uninstall this version of the 3DLabs Wildcat PRO Display Driver, use the Add/Remove Programs Properties utility in the Control Panel. WINDOWS NT 4.0 UNINSTALL ------------------------ 1. From the operating system Start menu, go to Settings/Control Panel and double-click Add/Remove Programs. 2. On the Add/Remove Programs Properties dialog, select "Wildcat Display Driver" from the list of available programs, and click Add/Remove to uninstall the existing driver. 3. A dialog will appear which describes the function of the 3Dlabs Display Driver uninstall program. You will be prompted to verify the removal of the Display Driver. Click Yes to complete the driver removal. Screen Resolution and Refresh Rate Table ======================================== To access the list of available screen resolutions and refresh rates, select the "List All Modes..." button on the "Settings" page of the Display Properties page. 1. From the operating system Start menu, go to Settings/Control Panel and double-click Display. 2. From the Display Properties dialog, click the Settings tab. 3. Click "List All Modes..." to access the table of supported screen resolutions and refresh rates. Monitor Selection ================= The "Wildcat Monitor" page in Display Properties must be used to change the monitor type. 1. From the operating system Start menu, go to Settings/Control Panel and double-click Display. 2. On the Display Properties dialog, click the Wildcat Monitor tab. 3. Click the "Configure Monitor" button. The "Configure Monitor" dialog will be displayed. 4. Select one of the three monitor types: Generic, Plug-and-Play, or Vendor. Selection of one of these three monitor types will potentially alter the list of resolutions reported in the "Available Resolutions" field. - The Generic monitor type will provide a list of generic resolutions. - The Plug-and-Play monitor type will provide a list of the resolutions supported by the monitor plugged into the system if the monitor is Plug-and-Play capable. - The Vendor monitor selection allows you to choose a specific monitor from the provided list of monitors. Once you have chosen a monitor, the resolution and refresh rate nearest to the current settings will be highlighted. 5. Select a resolution from the list of Available Resolutions. 6. Click OK to accept the new monitor, resolution, and refresh settings. A dialog box will display inquiring whether you wish to keep the new settings. If you select Yes, the settings will be changed and the Configure Monitor dialog will be dismissed. If you select No, the settings will revert to previous settings. Display Modes ============= The Wildcat Monitor page in Display Properties may be used to change display modes. 1. Choose the Display icon in the Control Panel. 2. Click the Wildcat Monitor tab. 3. Click Configure Monitor. The Configure Monitor dialog will be displayed. 4. Select a display mode from the Display Modes pull-down. 5. Select a resolution from the Available Resolutions list. 6. Click OK to accept the new display mode. Configuration ============= The "Wildcat Configuration" page in Display Properties must be used to change the driver configuration. The Synchronize Buffer Swap to Vertical Sync check box on the Wildcat Configuration tab is checked by default. This provides the highest visual quality. To obtain higher frame rate performance for benchmarking purposes, clear this check box so that the display is not synchronized to vertical sync. When this option is not checked, you may experience certain screen artifacts such as tearing; however, this box should generally be unchecked for performance benchmarking. Click Config Wizard on the Wildcat Configuration tab to activate a step-by-step interface that will allow you to modify your current display configuration or create a new one. In the Wildcat Configuration Wizard, click Next and follow the prompts to create a new configuration, or modify or delete an existing one. The default bitplane mode is 96; some resolutions are available only in 96 bitplane mode. Context-Sensitive Help ====================== Context-sensitive help is provided for 3Dlabs Wildcat dialogs in the Display properties applet. The only exception to this is the Configuration Wizard, which provides detailed instructions for each step. Context-sensitive help for a particular control is accessible using three different methods. - Click the question mark located on the title bar of the active dialog. The cursor will change to the help select cursor. Next, click on the control for which you wish to receive help. - Right-click the control for which you wish to receive help. - Set the focus on the control for which you wish to receive help and press F1. Any of these methods will display a small box filled with text that provides information on the control you have chosen. Customer Support ================ Support is available on our web site at http://www.3dlabs.com. Just click on the support link. You may also email us at support@3dlabs.com. New Features ============ Fixes ===== 04.04.01.03 - Fixed incorrect color for text of Viewperf title screen. 04.04.01.02 - Fixed overlay defect where overlay data was not being displayed when the window first appeared or was restored. - Fixed illegal instruction problems encountered when running OpenGL programs under NT4 on AMD processors that are SSE capable. - Fixed a hang that happened when running Unigraphics with a space ball and zooming in on a drawing. - Updated the configuration names for the Softimage Wildcat configurations. - Fixed incorrect texture map rendering when used after evaluators. 04.04.01.01 - Fixed a problem at large resolutions where offscreen images would be drawn at the top of the desktop. - Fixed hang that occurs intermittently when recovering from hibernation while some OpenGL applications are running. - In Display Applet, fixed the initial position of tab on slider bar for Pixel Alignment delay on "Multiview" page. - In Display Applet, forced Pixel Alignment back to it's original value when CANCEL is selected from "Multiview" page. - Improved behavior of system when a genlock source was selected but the system was not using a genlock timing from the timing file.