Morton F. Kaplon CIS:73457,437 Thu 12-22-94 CREATE a Single BOOT Floppy for WARP 3.0 One Disk Boot for WARP 3.0 for system Using FAT and Non-Micro Bus The example below uses 4OS2 as the Command Processor. If Use CMD.EXE uses even less space. Options given for Micro Channel and HPFS system. Volume in drive A is unlabeled Serial number is E24D:2414 Directory of a:\*.* <-------------- Comment --------------> 0 ____D 4os2 0 ____D os2 1,330 0 ___A_ config.sys 25,610 0 ___A_ country.sys 1,074 0 ___A_ dev002.msg 1,099 0 _HSA_ os2boot 555,972 0 _HSA_ os2krnl 30,208 0 _HSA_ os2ldr 8,366 0 _HSA_ os2ldr.msg 19,358 0 _HSA_ os2logo 89 0 _HSA_ os2ver 39,472 0 _HSA_ sysinstx.com Optional Use to Create bootable disks 268 0 _HSA_ wp root. sf 682,846 bytes in 11 files and 2 dirs 687,104 bytes allocated 46,080 bytes free Volume in drive A is unlabeled Serial number is E24D:2414 Directory of a:\os2\*.* <-------------- Comment --------------> 0 ____D . 0 ____D .. 0 ____D dll 17,820 0 ___A_ aha174x.add MY SCSI-replace with yours if needed 41,795 0 ___A_ cdfs.ifs Optional For CD ROM 68,656 0 ___A_ chkdsk.com 3,735 0 ___A_ clock01.sys If Micro Channel use clock02.sys 459 0 ___A_ config.sys 28,435 0 ___A_ ftdvr.sys Optional Driver for TAPE System 30,994 0 ___A_ ibm1flpy.add 9,860 0 ___A_ ibmint13.i13 5,548 0 ___A_ ibmkbd.sys 27,989 0 ___A_ kbdbase.sys 16,436 0 ___A_ optical.sys Optional M-O driver 24,236 0 ___A_ os2cdrom.dmd Optional CD ROM driver 33,562 0 ___A_ os2dasd.dmd 9,692 0 ___A_ os2scsi.dmd If Micro Channel use ibm2scsi.add 10,910 0 ___A_ print01.sys If Micro Channel use print02.sys 27,084 0 ___A_ resource.sys 9,461 0 ___A_ screen01.sys If Micro Channel use screen02.sys 10,820 0 ___A_ tedit.exe Optional tiny Editor 14,596 0 ___A_ tedit.hlp Optional tiny Editor IF use HPFS need to have 135,746 0 ___A_ hpfs.ifs 392,088 bytes in 19 files and 3 dirs 398,336 bytes allocated 46,080 bytes free Volume in drive A is unlabeled Serial number is E24D:2414 Directory of a:\os2\dll\*.* <-------------- Comment ---------------> 0 ____D . 0 ____D .. 512 0 ___A_ bkscalls.dll 6,176 0 ___A_ bmcompr.dll Optional - Used for Tape Drive 512 0 ___A_ bmscalls.dll 7,999 0 ___A_ bvhinit.dll 512 0 ___A_ bvscalls.dll 137,084 0 ___A_ doscall1.dll 1,024 0 ___A_ kbdcalls.dll 1,024 0 ___A_ moucalls.dll 512 0 ___A_ msg.dll 1,024 0 ___A_ nampipes.dll 512 0 ___A_ nls.dll 25,504 0 ___A_ npxemltr.dll 512 0 ___A_ os2char.dll 1,024 0 ___A_ quecalls.dll 1,536 0 ___A_ sesmgr.dll 2,048 0 ___A_ viocalls.dll 187,515 bytes in 16 files and 2 dirs 189,440 bytes allocated 46,080 bytes free Volume in drive A is unlabeled Serial number is E24D:2414 Directory of a:\4os2\*.* <--------------- Comment ----------------> 0 ____D . Optional no 4os2 subdirectory 0 ____D .. Optional no 4os2 subdirectory 134,880 0 ___A_ 4os2.exe Optional use: 90,624 0 ___A_ cmd.exe 431 0 ___A_ 4os2.ini Optional 0 30 0 ___A_ 4start.cmd Optional 0 1,434 0 ___A_ alias.lst Optional 0 136,775 bytes in 4 files and 2 dirs 138,752 bytes allocated If use cmd.exe 136,775 -> 90,624 Bytes, Gain of 46,151 bytes 46,080 bytes free <<<<<<<<<<<<< Below is contents of config.sys on A: floppy >>>>>>>>>>>>>>> REM STart of config.sys BUFFERS=30 IOPL=YES MEMMAN=NOSWAP PAUSEONERROR=YES DISKCACHE=64,LW PROTECTONLY=YES REM *** OS/2 Command Processor REM SET OS2_SHELL=CMD.EXE REM PROTSHELL=CMD.EXE REM *** OS/2 Command Processor REM *** 4OS2 16 bit Command Processor SET OS2_SHELL=A:\4OS2\4OS2.EXE PROTSHELL=A:4OS2\4OS2.EXE SET COMSPEC=A:\4OS2\4OS2.EXE SET PROMPT=[4OS2$p] REM *** 4OS2 16 bit Command Processor LIBPATH=.;A\:;A:\OS2\DLL SET PATH=A:\;A:\OS2;A:\4OS2 SET DPATH=A:\;A:\OS2;A:\4OS2 SET KEYS=ON Rem *** Driver for Parallel Port for Optical REM BASEDEV=EPSA.ADD /T Rem *** Driver for Parallel Port for Optical BASEDEV=AHA174X.ADD /V REM may need to change for your system BASEDEV=OS2SCSI.DMD BASEDEV=OS2DASD.DMD BASEDEV=IBM1FLPY.ADD BASEDEV=PRINT01.SYS REM change to PRINT01.SYS for Micro Channel BASEDEV=IBMKBD.SYS REM *** Driver for Optical Off SCSI Optional for Optical drive DEVICE=A:\OS2\OPTICAL.SYS REM *** Driver for Optical Off SCSI rem *** Files for use of CDROM and Hard Disk via Adaptec Optional DEVICE=A:\OS2\OS2CDROM.DMD /Q IFS=A:\OS2\CDFS.IFS /Q rem *** Files for use of CDROM and Hard Disk via Adaptec Rem *** driver for Tape Drive Optional DEVICE=A:\OS2\FTDVR.SYS Rem *** driver for Tape Drive REM OPTIONAL: If use HPFS need to have statement IFS=A:\OS2\HPFS.IFS /whatever options you use REM End of Config.sys There are 203,816 bytes listed as Optional (including using cmd.exe) so there is readily sufficient space to install the HPFS by deleting some of those. There would still be room to add back in the Tiny Editor plus some more. TO CREATE the BOOTABLE Floppy SYSINSTX,COM can be found on the WARP Install Diskette Copy it to your existing WARP \OS2 directory and with a formatted floppy in A: give the command sysinstx A: This will make the floppy a bootable disk - it transfers system files. You can then use attrib -sh *.* on your C: root directory to make the other files available and copy those (as listed above) to the A: root drive. Then use attrib +sh on each of those files to make it hidden again. ***** I originally used the Create Utility option ti create the 3 floppy disks that it does. I noted that only disk 1 and 2 are required for the boot process. I also noted that this procedure did not allow the inclusion of the additional drivers I needed (tape,optical,CD ROM) so using the files included on these 2 drives and eliminating the superfluous ones I arrived at the above combinations.