Patch Name: PHSS_28226

Patch Description: s700_800 10.20 OV OB4.10 patch - FASTRAX packet

Creation Date: 02/11/28

Post Date:  02/12/10

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	OmniBackII A.04.10

Filesets:
	OMNIBACK-II.OMNI-FASTRAX-P,A.04.10

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28226

Symptoms:
	PHSS_28226:
	Id = HSLco32238  SR: H555006990
	    Backing up a symmetrix logical device which is not
	    visible to the host fails with the following error:

	      "[223:125] Resolving of object <number> has failed.
	       (Device is not visible to the host. Check if it is
	       meta device number (not supported)!)"

	Id = HSLco34780  SR: H555008102
	    Fastrax backup fails with:

	      "Object definition failed!"

Defect Description:
	PHSS_28226:
	Id = HSLco32238
	    Backup of symmetrix logical devices that are not visible
	    to cell server (but are in the same symmetrix box to
	    which the host is connected) is not possible because of
	    incorrect resolving logic.

	Resolution:
	    Resolving algorithm is improved in order to properly
	    resolve and back up "invisible" devices.

	    Part of SSPUX410_005.

	Id = HSLco34780
	    Invalid extent is used for backup object definition.

	Resolution:
	    Backup object is properly defined.

SR:
	H555008102 H555006990

Patch Files:
	/opt/omni/databases/vendor/fastrax/hp/s800/hp-ux-1020/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/fastrax/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fastrax/sun/sparc/solaris-26/
		A.04.10/packet.Z

what(1) Output:
	/opt/omni/databases/vendor/fastrax/hp/s800/hp-ux-1020/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/fastrax/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fastrax/sun/sparc/solaris-26/
		A.04.10/packet.Z:
		None

cksum(1) Output:
	2663055433 310192 /opt/omni/databases/vendor/fastrax/hp/
		s800/hp-ux-1020/A.04.10/packet.Z
	521630588 321263 /opt/omni/databases/vendor/fastrax/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	3630707113 294779 /opt/omni/databases/vendor/fastrax/sun/
		sparc/solaris-26/A.04.10/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHSS_28227:
	s700: 11.00 11.11 11.20
	s800: 11.00 11.11 11.20

Patch Package Size: 960 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_28226

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_28226.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_28226.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_28226.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_28226.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_28226:
	NOTE!
	Patch has to be installed on the Installation Server host.

	The Fastrax packets must be redistributed to the Fastrax
	client system(s) afterwards to get the fixes into effect.


	Patch includes the following Site Specific Patches:
	   SSPUX410_005