INSTALL.TXT for System Update Package (SUP).

This SUP file was created on February 14, 2003

  SCB2 System Update Package (SUP)

  Disk 1 of 1

  BMC     63
  HSC     0.07 (SR1200) & 0.05 (SR2200)
  FRU/SDR CB-5.0.P
  BIOS    Production Release 2.12 (Build 0077)

DEPENDENCIES:
You MUST boot system from SYSTEM RESOURCE CD to run this disk.

CONTENTS (17 FILES):
	1.BAT		[Creates SUP     floppy disk]
	2.BAT		[Creates BIOS    floppy disk]
	3.BAT		[Creates BMC     floppy disk]
	4.BAT		[Creates HSC     floppy disk]
	5.BAT		[Creates FRU/SDR floppy disk]
	DATA.LZH	[bios, bmc, hsc, fru/sdr files compressed with lha]
	INSTALL.TXT 	[this file]	
	LHA.EXE		[compression/decompression utility]
	license.txt	[license agreement]
	MAKEDISK.BAT	[Menu for creating individual floppy disks]
	NED.CFG		[text editor configuration file]
	REBOOT.COM
	restart.bat
	SETUP.BAT	[starts the update process]
	sup.bat		[sets environment variables - Does NOT launch SUP]
	sup.txt		[Release notes for the SUP package]
	supdata.bat	[contains variables - Does NOT launch SUP]
	

INSTRUCTIONS:

1) Extract the contents of SUP executable file to a DOS-formatted floppy disk.  
If you don't have DOS available, boot the server to the System Resource CD that 
shipped with the server.  At the menu, select "Quit to DOS".  From the C:\ 
prompt, type "FORMAT A:" and press Enter.  NOTE: All Intel server board
System Resource CDs include ROM-DOS; you don't necessarily have to 
use the System Resource CD that shipped with your server.

2) Boot the server from the "SERVER BOARD RESOURCE CD" that shipped with 
the Intel server.

3) After booting from the CD, select "QUIT TO DOS" from the menu.  

4) Place the System Update Package disk in the A: drive and type 
the command A:\SETUP.BAT then press ENTER.

5) Read the license agreement.

6) Accept the license agreement to continue.

7) The System Update Package menu will appear. Perform the steps in numerical 
order to update the firmware and the BIOS.  If you have questions on any of 
the utilities, please view the SUP.TXT and README.TXT files.

9) After finishing the BIOS update, reboot the server and press F2 to 
customize the BIOS settings.

For updates and technical assistance, please visit 
http://support.intel.com/support/motherboards/server/

[END OF INSTALL.TXT]