***IMPORTANT NOTE: Updating the system firmware is done so at your own risk. Incorrect use may render your system unusable and invalidate warranty.***



Copy the following files to a bootable USB key.

BE0048.BIO
BE0099.BIO
BE0120.BIO



STEP 1:
Update system to 0048 using Express BIOS update.

To perform Express BIOS update, boot system as normal and during POST press F7.
On the following screen select the removable media where your BIOS is stored, navigate to the correct folder and choose the BIOS you wish to use.
Note: You may be prompted to allow or reject the BIOS update, choose to allow it with the relevant keystroke.
---------------------------------------------------------

STEP 2:
Update system to 0099 using Express BIOS update.

To perform Express BIOS update, boot system as normal and during POST press F7.
On the following screen select the removable media where your BIOS is stored, navigate to the correct folder and choose the BIOS you wish to use.
Note: You may be prompted to allow or reject the BIOS update, choose to allow it with the relevant keystroke.
---------------------------------------------------------

STEP 3:
Update system to 0120 using Express BIOS update.

To perform Express BIOS update, boot system as normal and during POST press F7.
On the following screen select the removable media where your BIOS is stored, navigate to the correct folder and choose the BIOS you wish to use.
Note: You may be prompted to allow or reject the BIOS update, choose to allow it with the relevant keystroke.

If this fails then....

Update system to 0120 using recovery BIOS method.

To perform a recovery BIOS flash, copy the required BIOS file to the root of a USB key (NOTE: Please ensure only BIOS file you wish to use is in the root directory).
Turn off the target system, remove the yellow BIOS config jumper, plug the USB drive into one of the rear ports and then power on the system.
The standard Intel splash screen should appear after a few seconds and then the BIOS update process will begin.
Once BIOS update is complete and the system has rebooted and successfully completed POST, power off the system, refit the yellow BIOS config jumper.
Note: You may be prompted to allow or reject the BIOS update, choose to allow it with the relevant keystroke.
---------------------------------------------------------