INTRODUCTION

By default, Microsoft Windows XP and Microsoft Windows Server 2003 enable auniversal serial bus (USB) keyboard and a USB mouse to wake a computer  after the computer goes in hibernation Other types of USB devices can be enabled to wake the computer if you click to select the Allow this device to bring the computer out of standby check box. You can click to select this check box on the Power Management property page in Device Manager.

When a USB device is enabled to wake the computer, the default behavior permits the computer to enter the S1 system power state for standby. Standby is not the S3 system power state. The S1 system power state is a "lighter" system power state than S3. The S1 system power state typically conserves less power than the S3 system power state. 


By using the USBBIOSx patch, you can override entering the S1 system power state as a default behavior when a USB device is enabled to wake the computer:


To Apply the USBBIOSx patch carry out following steps:

1. Double Click on USBBIOSx
                   Message will appear "Are you sure you want to add USBBIOSx.reg to the registry"

2. Select YES to apply the patch.
       
                  Message will appear "USBBIOSx.reg has been successfully entered into registry."

3. Select OK and restart the system.


The USBBIOSx patch applies to:

• Microsoft Windows XP Professional 
• Microsoft Windows XP Home Edition 
• Microsoft Windows Server 2003, Standard Edition 
• Microsoft Windows Server 2003, Datacenter Edition 
• Microsoft Windows Server 2003, Enterprise Edition 
• Microsoft Windows Server 2003, Web Edition