1. SETMODE.EXE: Set VGA and SuperVGA mode utility.
2. SETFREQ.EXE: Set monitor refresh rate utility.
3. FREQ.EXE:	Refresh rate grab utility.
4. IRQ2.EXE:	IRQ2 enable or disable utility
5. FTCONNT.SYS: A DOS device driver to enable IGA1682 feature connector.
		If you are going to use IGA1682 feature connector,
		e.g. use Realmagic card (an MPEG playback card
		from Sigma Designs) through IGA1682 feature
		connector, you should first enable IGA1682 feature
		connector as follows:
		Edit config.sys and put the following line in the
		very first row of config.sys
		     device=ftconnt.sys
		then reboot system. Now IGA1682 feature connctor
		is on and IGA1682 is forced to be 1 MB memory
		configuration.


Please read UERS GUIDE for more informations about the utilities.
