Cable Diagnostic Utility
Objective of this cable diagnostic utility is to provide users a easy way to diagnose 
the cable. This cable diagnostic utility provides some services as follows:
(1) Fault-free cable length estimation: to detect length of good cable in meters based on average electrical length of four pairs.
(2) Cable fault type identification: to detect the cable fault condition, which is open, short, or short-between-pairs for each one of the four pairs within the cable bundle.
(3) Cable fault distance estimation: to detect the distance along cable in meters from the local end to the location of fault.

Users just need to run CDiagUtil.exe, then click the button Cable Diag. You will see the testing results: cable status and cable length. 
On the utility, you can also see some information about NIC, for example, SiS Ethernet Host Controller(MAC) identify, base address (memory and I/O base address) , and IRQ number. You can also see the PHY identify on the form.    
