(C)Copyright 2003 3Com Corporation. All rights reserved
3C2000-T Gigabit Ethernet Desktop NIC


Windows 98 SE Driver Installation
---------------------------------

The Windows 98 SE driver installation requires the use of the 3Com Master Navigator, as described below in installing the driver.

Requirements:
-------------

1. Make sure that all hardware installation requirements are met. See 
   Hardware Requirements in the userguide.

2.  You have Network Administrator privileges
    
NOTES:
    
    - Do not install the NIC in the PC until after you have saved the drivers 
      to your systems hard drive, as described below.

    - Verify that the Windows operating system has been updated with the
      latest version and latest service pack. 

    - Make sure that the latest system BIOS and firmware versions are installed 
      in your computer.


To install the driver:
-----------------------

1. Turn on the power to the PC.

2. Insert the 3Com Installation CD in the CD-ROM drive.

   - If the 3Com Connection Assistant is not installed, you will be prompted 
     to install it. Click Yes to install the 3Com Connection Assistant. When 
     finished, you will be directed to the Master Navigator main menu.

   - If the 3Com Connection Assistant is installed, the Master Navigator main 
     menu will appear.

3. Click NIC Software.

4. Click Install NIC Driver and Diagnostics.

5. Follow the prompts to save the drivers to your hard drive.

6. Once drivers are saved you will be prompted to shut down the PC.Click Yes to 
   continue.

7. Install the NIC hardware.  See Installing the NIC in the userguide.

8. Turn on power to the PC.

9. The Add New Hardware Wizard will automatically detects the NIC and will prompt you 
   to search for new drivers.

10. Click Next to continue.

11. Select the Specify a location box and using the pull down menu locate 
    C:\WINDOWS\Options\CABS.

12. Click Next to continue.

13. Select Floppy disk drives and then click Next.

14. Select the box to Install the updated driver and follow the prompts to install 
    the drivers on your PC.

15. When the drivers are installed, click Finish.

17. Reboot the PC.

The installation is complete.
