TITLE: Intel PRO/100 Drivers for DOS

VERSION: 4.57 Rev. A
DESCRIPTION:
This package provides the integrated Intel Pro/100 DOS Drivers for the 
supported desktop models. This package can only be used in a DOS environment. 

NOTE: For more information, see the detailed readme file, which will be located 
in C:\SWSetup\sp37611\DOS-ODI\driv_dos.htm after unpacking the files. 

PURPOSE: Routine
SOFTPAQ NUMBER: SP37611
SUPERSEDES: None
EFFECTIVE DATE: October 30, 2007
CATEGORY: Driver - Network
SSM SUPPORTED: No

PRODUCT TYPE(S):
Desktops

HARDWARE PRODUCT MODEL(S):
HP Compaq dx2300 Microtower PC: All Models
HP Compaq dx2308 Microtower PC: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
FreeDOS

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
None

INSTALLATION INSTRUCTIONS: 
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file to unpack the drivers. By default, the driver is 
located in:

C:\SWSetup\sp37611\DOS\E100BODI.COM.

3. Copy the following files from the \DOS directory to the appropriate 
directory on your hard drive (usually the \NWCLIENT directory):

\LSL.COM
\E100BODI.COM
\IPXODI.COM
\NETX.EXE
\NET.CFG (if one does not already exist)

4. Modify the sample NET.CFG as needed (you may need to change the frame 
type).

5. At the DOS prompt, load the drivers in the following order:

LSL
E100BODI
IPXODI
NETX

(if the LASTDRIVE= statement is in your CONFIG.SYS, make sure it's less than 
"Z".)

Sample NET.CFG (provided in the \DOS directory):

For 802.3 clients - generally NetWare 2.x and 3.11 servers:
LINK DRIVER E100BODI 
FRAME ETHERNET_802.3

For 802.2 clients - generally NetWare 3.12 and 4.1 servers:
LINK DRIVER E100BODI 
FRAME ETHERNET_802.2

If you do not know which frame type to load, type CONFIG from your file server 
console to see which frame type your file server is loading and load one of 
these frame types on the workstation.

If you list two or more frame types in the NET.CFG, the IPX protocol binds to 
the first frame type.

The NET.CFG file should be in the same directory as the adapter driver.


Copyright (c) 2007 Hewlett-Packard Development Company, L.P.