TITLE: HP iPAQ h6300 Pocket PC Series ROM Update

VERSION: 1.10
DESCRIPTION: 
This package contains the ROM Update Utility (RUU) and ROM image for the 
listed handheld models and operating systems.
             
     IMPORTANT: The RUU replaces the current ROM image and erases the 
     partnership and all user data and user-installed programs on the 
     handheld. It is important to read and understand the information 
     in the Readme.txt file included with this update BEFORE installing
     the package.

     Use Microsoft ActiveSync to synchronize the personal information
     manager (PIM) data with Microsoft Outlook on a desktop and to save
     a copy of user data, if any, before performing the ROM update. After 
     completing the ROM update, establish a new ActiveSync partnership with 
     the desktop. The handheld will be synchronized with the PIM data from 
     Outlook. Reinstall any user-installed programs and user data, if 
     necessary.

     Because of changes in the registry and system files introduced by the 
     new ROM, the new ROM will not recognize a backup file generated using 
     the previous ROM.

PURPOSE: Recommended
SOFTPAQ NUMBER: SP30018
SUPERSEDES: SP29758
EFFECTIVE DATE: April 18, 2005
CATEGORY: BIOS 
SSM SUPPORTED: No

PRODUCT TYPE(S): 
Handhelds

PRODUCT MODEL(S): 
HP iPAQ h6340 Pocket PC

OPERATING SYSTEM(S): 
Microsoft Windows Mobile for Pocket PC Phone Edition 2003

LANGUAGE(S):
French

ENHANCEMENTS: 
 - Provides GSM Firmware version 541d Update, which:
     - Supports 64-KB SIM cards.
     - Improves call handling.
     - Improves reception.
 - Provides Wireless LAN Driver build 62, which:
     - Improves reception and roaming.
     - Extends the maximum length of lightweight extensible authentication
       protocol (LEAP) username and password to 63 characters.
 - Provides Bluetooth Software version 1.0.0.3701, which:
     - Improves headset compatibility.
     - Improves headset reconnection when returning into service area.
     - Adds support for Siemens car adapter kit.
     - Enables pairing using 16-character PIN code.
 - Increases the paging-pool size from 4 MB to 6 MB.
 - Activates echo cancellation for wired headset.

FIXES: 
 - GSM Firmware version 541d Update:
    - Fixes issue where dual-tone multi-frequency (DTMF) did not work with 
      interactive voice response (IVR) systems.
    - Fixes GSM/GPRS settings to handle connectoid name with more than 20 
      characters.
    - Fixes issue where Inbox attachments from certain ISPs were unable
      to be sent over the GPRS connection.
 - Wireless LAN Driver build 62:
    - Fixes issue that occurred with tunneled transport layer security (TTLS) 
      server certificate validation.
    - Fixes unrecognizable characters that are displayed during login when 
      using TTLS with MS-CHAP2.
    - Fixes LEAP authentication to redisplay login prompt after tapping 
      Cancel.
    - Changes display name to "HP iPAQ Wi-Fi Wireless Adapter."
 - Bluetooth build 1.0.0.3701:   
    - Fixes inaccurate display of headset icon when a call is in progress.
    - Adds a check to determine if Bluetooth stack is initialized before 
      accepting messages from phone.
    - Adds a user interface (UI) change to enable a connected headset to
      automatically disconnect before attempting to connect to a different 
      headset when the user chooses to connect to a second headset.
    - Fixes check for invalid device name.
    - Fixes issue where handheld could not reconnect to remote device after 
      a page timeout.
    - Fixes Object push profile update so it sends all files.
    - Updates FTP connection wizard to correct service discovery issue.
    - Fixes issue with call waiting for incoming call handling while dialing 
      out.
    - Fixes issue with headset connection icon so it is correctly displayed 
      after power cycling.
    - Fixes audio to make it compatible with an in-car solution.
 - Fixes audio issue where the right channel for a headset was unavailable 
   for playing audio and during calls.
 - Fixes issue where the LED and network status were not properly 
   synchronized.
 - Fixes issue where the user could not send multimedia messaging (MMS) 
   message.

PREREQUISITES: 
 - Microsoft ActiveSync 3.7.1 (or later) is required.

HOW TO USE:

1. Download the SoftPaq .EXE to a directory on your hard drive. 

2. Execute the downloaded file and follow the on-screen instructions to unpack
   the ROM Update files to a directory. (NOTE: This directory should not 
   contain any file or folder from any previous ROM Upgrade.) 

3. Establish an Activesync connection between the handheld and host PC using 
   the USB connection. 

4. At this point, RUU.exe should start automatically. Follow the on-screen 
   instructions to complete the ROM upgrade. 

NOTE: Once the update is complete, the .EXE file downloaded in Step 1 can be 
deleted, if desired.


INSTALLATION NOTES:

1. During the update, the ROM Update Utility will:
   - Query the handheld for current ROM image information.
   - Validate that the new ROM image is compatible with the handheld.
   - Automatically place the iPAQ handheld in Flash mode.
   - Update the ROM image on the handheld.

2. IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If 
   Standby or Hibernation mode is activated during the upgrade process, a 
   critical error may occur.

3. IMPORTANT: Plan for enough time to complete the update. The total time to 
   perform this ROM update is estimated at 20 minutes with a USB connection.
        
4. IMPORTANT: Do not interact with the handheld or remove it from AC power
   or the cradle/cable once the status bar appears on the handheld and the 
   actual update has started.

5. If an error message is displayed during the process, follow any available 
   instructions to correct the condition and start the ROM Update Utility 
   again.

6. The update process can be performed while connected to a host PC either as 
   a Guest or with an established partnership.


Copyright (c) 2005 Hewlett-Packard Development Company, L.P.