TITLE: HP Remote Graphics/Workstation SSL Certificate Linux Update

VERSION:  2.1.0 Rev. A
DESCRIPTION:
This package contains files that can be used to update the SSL certificates for 
the listed workstation models and operating systems.

NOTE: Because of the expiration date on the SSL certificates, the Receiver will 
no longer establish a connection to the Sender after 22 February 2005. When 
attempting to connect to a Sender, the following error message is displayed in 
an error dialog, ''Unable to connect to Sender!'' 

To immediately resolve this issue, update your certificates using one of the 
attached files. 

PURPOSE: Critical
SOFTPAQ NUMBER: SP29929
SUPERSEDES: None
EFFECTIVE DATE: March 4, 2005
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

PRODUCT MODEL(S):
HP Workstation xw3100: All Models
HP Workstation xw4000: All Models
HP Workstation xw4100: All Models
HP Workstation xw4200: All Models
HP Workstation xw5000: All Models
HP Workstation xw6000: All Models
HP Workstation xw6200: All Models
HP Workstation xw8000: All Models
HP Workstation xw8200: All Models
HP Workstation xw9300: All Models

OPERATING SYSTEM(S): 
Red Hat Linux 7.1
Red Hat Linux 7.2
Red Hat Linux 7.3
Red Hat Linux 8.0
Red Hat Linux 9
RH Ent Linux 3 (AMD64/EM64T)
RH Ent Linux 3 (x86)

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

FIXES: 
- Updates SSL certificates.

PREREQUISITES: 
N/A

HOW TO USE: 
INSTALLATION PROCEDURE FOR ALL REMOTE GRAPHICS SOFTWARE PRODUCTS:

1. As ''root,'' open a console session or telnet into the system.

2. Change to the directory where the HP Remote Graphics Sender is installed by 
executing the following command:
cd /opt/hpremote/rgsender

3. Remove the certificates directory called ''certs,'' which is located in 
/opt/hpremote/rgsender by executing the following command:
rm -rf certs

4. Copy the file certs.tar.gz, which is supplied with this download, into 
/opt/hpremote/rgsender.

5. Unpack the file certs.tar.gz by executing the following commands:
gunzip certs.tar.gz
tar -xvf certs.tar

6. You should now see a newly created directory called ''certs'' in 
/opt/hpremote/rgsender that replaces the ''certs'' directory you deleted.

7. Change to the directory where the HP Remote Graphics Receiver is installed 
by executing the following command:
cd /opt/hpremote/rgreceiver

8. Remove the certificates directory called ''certs,'' which is located in 
/opt/hpremote/rgreceiver by executing the following command:
rm -rf certs

9. Copy the file certs.tar.gz, which is supplied with this download, into 
/opt/hpremote/rgreceiver.

10. Unpack the file certs.tar.gz by executing the following commands:
gunzip certs.tar.gz
tar -xvf certs.tar

11. You should now see a newly created directory called ''certs'' in 
/opt/hpremote/rgreceiver that replaces the ''certs'' directory you deleted.

12. To complete the installation, restart (reboot) the system.

INSTALLATION PROCEDURE FOR REMOTE WORKSTATION PRODUCTS:

1. As ''root,'' open a console session or telnet into the system.

2. Change to the directory where the HP Remote Workstation Receiver is 
installed by executing the following command:
cd /opt/RemoteWorkstationReceiver

3. Remove the certificates directory called ''certs,'' which is located in 
/opt/RemoteWorkstationReceiver by executing the following command:
rm -rf certs

4. Copy the file certs.tar.gz, which is supplied with this download, into 
/opt/RemoteWorkstationReceiver.

5. Unpack the file certs.tar.gz by executing the following commands:
gunzip certs.tar.gz
tar -xvf certs.tar

6. You should now see a newly created directory called ''certs'' in 
/opt/RemoteWorkstationReceiver that replaces the ''certs'' directory you 
deleted.

7. To complete the installation, restart (reboot) the system.




Copyright (c) 2005 Hewlett-Packard Development Company, L.P.