TITLE:  iPAQ Connection Point CP-2W/CP-2E Firmware Update Utility

VERSION:  2.03
DESCRIPTION:  
This Softpaq contains an updated firmware image (Version 2.03) for 
the Compaq iPAQ Connection Point CP-2W/CP-2E. A new firmware update
utility (Version 1.3) is included to restore or upgrade the 
firmware. This Softpaq also contains the language pack files v1.1 for French, Spanish,
Swedish, German, Italian, Dutch and T-Chinese. 

PURPOSE: Recommended Update
SOFTPAQ NUMBER:  SP21202
SUPERSEDES:  SP19335
PART NUMBER:  250537-00a-011
EFFECTIVE DATE:  June 21, 2002
CATEGORY:  ROMPaqs/BIOS and Firmware
SSM SUPPORTED: No

PRODUCT TYPE(S):
Notebooks, Desktops

PRODUCT MODEL(S): 
Compaq iPAQ Connection Point CP-2W
Compaq iPAQ Connection Point CP-2E

OPERATING SYSTEM:
Microsoft Windows 98
Microsoft Windows NT 4.0
Microsoft Windows 2000
Microsoft Windows Millennium Edition (ME)
Microsoft Windows XP 32-bit Personal
Microsoft Windows XP 32-bit Professional

LANGUAGEs:  English, French, German, Italian, Spanish, Dutch, Swedish, T-Chinese

ENHANCEMENTS: 
 - SMTP, NTP support
 - Language Interface support for French, Spanish, Swedish, German, Italian, English,
   Dutch and T-Chinese
 - User friendly quick setup wizard
 - Persistence DHCP table
 - L2TP PPTP, Ipsec VPN support
 - Stealth ports
 - Easy Wireless configuration
 - Hacker detection

PREREQUISITES: 	N/A

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a 
self-extracting executable with a filename based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions to install the 
firmware update utility.

3. Open a web browser.

4. Type cp.home into the Address field and press Enter. You may also
type in the base address, which is 192.168.1.1. The Language
Selection screen is displayed.

5. Select the language you wish to use. If English is selected the country
screen appears.  

Note: If selecting a language other than English, when the Language Update screen appears, 
click Browse. The language files are located in C:\SP21202\Language_Packs. Select the 
appropriate file and Click Add. Then, click OK.

6. On the Country Screen, select the country in which Connection Point
will be used. Click Next.

7. On the Warning Screen, click OK if you have selected the correct
country. If you have selected the country incorrectly, click Cancel and
choose your country again.

8. Click Next, then OK.

Connection Point will automatically attempt to connect to the Internet. If
connection is established, proceed to SSID section. If connection is not
established, if you are unsure of which method to use, click I’m not sure on
the Connection Method screen. A Help screen appears giving you additional information 
to assist in your selection.


Copyright (C)2002, Compaq Information Technologies Group, L.P.
Compaq and the Compaq logo are trademarks of Compaq Information Technologies
Group, L.P. in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective
Companies.