SOFTPAQ NUMBER: SP17879
PART NUMBER: 254003-042 
FILE NAME: N/A
TITLE: Compaq Server Diagnostics
VERSION: 10.37 Rev a
LANGUAGE: German (GR)

CATEGORY: Diagnostics

DIVISIONS: Enterprise

PRODUCTS AFFECTED: 
     ProLiant 8500: All Models
     ProLiant 8000: All Models
     ProLiant 7000: All Models
     ProLiant 6500: All Models
     ProLiant 6400R: All Models
     ProLiant 6000: All Models
     ProLiant 5500: All Models
     ProLiant 5000: All Models
     ProLiant 4500: All Models
     ProLiant 4000: All Models
     ProLiant 3000: All Models
     ProLiant 2500: All Models
     ProLiant 2000: All Models
     ProLiant 1850R: All Models
     ProLiant ML570: All Models
     ProLiant ML530: All Models
     ProLiant ML330: All Models
     ProLiant ML350: All Models
       ProLiant ML350-G2: All Models
       ProLiant ML350-G2: All Models
     ProLiant ML370: All Models
     ProLiant DL580: All Models
     ProLiant DL380: All Models
	Proliant DL370-G2: All Models
	Proliant DL380-G2: All Models
     ProLiant DL360: All Models
     ProLiant CL1850: All Models
     ProLiant CL380: All Models
     ProLiant 1600: All Models
     ProLiant 1500: All Models
     ProLiant 1200: All Models
     ProLiant 1000: All Models
     ProLiant 850R: All Models
     ProLiant 800: All Models
     ProLiant 400: All Models
     Prosignia Server 720: All Models
     Prosignia Server 740: All Models
     ProSignia 200: All Models
     ProSignia 300: All Models
     ProSignia 500: All Models
     ProSignia VS: All Models
     ProSignia 486: All Models
     ProSignia P5/60 SCSI: All Models
     SystemPro XL: All Models
     SystemPro: All Models
     SystemPro LT: All Models
     TaskSmart N-Series: All Models
     ProLiant DL320: All Models

OPERATING SYSTEM: Microsoft Windows 2000
                  Microsoft Windows NT 4.0
                  Microsoft Windows NT 3.51
                  Microsoft MS-DOS
                  Novell NetWare 5.x
                  Novell NetWare 4.x
                  Novell NetWare 3.x
                  SCO UnixWare 7
                  SCO OpenServer 5
                  SCO OpenServer 3
                  SCO OpenServer 2.1
                  Linux
                  Sun Solaris 8 Intel Platform Edition
                  Sun Solaris 7 Intel Platform Edition
                  Sun Solaris 2.6 Intel Platform Edition
                  IBM OS/2
                  Banyan VINES

SYSTEM CONFIGURATION: N/A

PREREQUISITES: N/A
EFFECTIVE DATE: August 2001

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5

SUPERSEDES:
SP15857,SP16098,SP16240,SP16283,SP16337,SP16365,SP17884

DESCRIPTION:
Compaq Server Diagnostics will display information about the computer's 
hardware and  test the computer to ensure it is operating properly.

ENHANCEMENTS/FIXES:

Added Support for the ProLiant ML350 G2.
Added Support for the ProLiant ML330 G2.
Added support for the SA 5312.
Added support for the SA 4250ES.
Added support for the SN-124  68 pin CDROM drive.
Added support for the SN-124Q 68 pin CDROM drive.


Fix -- Memory.tm   Fixed Memory Support for The ProLiant DL380-G2 and the ProLiant ML370-G2 by adding new cache sizes for P6 processors. Fixing test time issues.
Fix -- Inspect.exe Fixed memory dimm numbering for the ProLiant DL380-G2 and the ProLiant ML370-G2 so that inspect numbers the dimms using the 1A, 2B, 3C, 4D, 5E and 6F printed in the documentation.
Fix -- Memory.tm   Fixed memory support at 4 Gigabytes for ProLiant 8000.
Fix -- Inspect.exe Fixed product name display  in Inspect.
Fix -- Diag.exe    Fixed product name display in Device List.
Fix -- HBAOO.TM    Added Garbage collection to the module, added search for memory to release.
Fix -- HBAOO.TM    Fixed problem with testing allowed changing depending on which mode is run first.
Fix -- CPU.TM      Put CMOS tests back in to test sequences.
Fix -- CPU.TM      Fixed code so that CPU ID will be displayed for multiprocessors.
Fix -- Disk.tm     Fixed a capacity problem for arrays with drives bigger than 30 Gig.
Fix -- SCSI.TM     Fixed display of certain CDROMs in device list after running Inspect.  In previous versions sometimes CDROMs would not show up after running inspect.
Changed Support  HBAOO.TM READ test to quick check and automatic mode for disk drives
Changed Support for HBAOO.tm removed block skip count from automatic mode READ test, so that it will test the entire disk.
Changed Keyboard message to specify that a PS/2 keyboard was not found  "failed / Non-PS/2 Keyboard found" meaning a USB keyboard may be plugged in.
Increased erase time out on 12/24 GB Tape drive to avoid a time out error.


NOTE: For the Smart Array Controller 5i, Smart Array Controller 5300 and Smart Array 532 controllers test and inspect are still the same.
Test (diag.exe) can now do a controller ID and a read test of drives off of these controllers,
Device list can list the controllers and the drives off of the controllers.  The numbering of the drives is still not mapped to a physical slot.
Inspect can see the controllers but not the drives off of the controllers.  (This will not be changed there was no room in inspect to perform the operations necessary.  Work Around use your inspect AND device list output files when communicating issues if you have one of these controllers.)
Smart Array Controller 5i, Smart Array Controller 5300 and Smart Array 532 testing currently is English only translations.





HOW TO USE:
1.  Download the SoftPaq to a directory on your hard drive. The file downloaded is 
a self-extracting executable with a filename based on the SoftPaq Number.

2.  Execute the downloaded file and follow the on-screen instructions. Pressing 
"Space Bar" to confirm the unpacking of files creates a new directory folder in 
the download directory. The diskette image file, the image extraction tool, and 
the batch file to create the diskette are unpacked into this newly created 
directory.

3.  After the Diagnostic diskette has been created, you may delete the 
self-extracting file downloaded in step one, as well as the directory folder 
and files created in step two. 


4.  Go to the system that you want to run Server Diagnostics on and power down the 
system.

5.  Place the newly created Diagnostics diskette in Drive A:, and power up the 
system.

6.  The system should then boot to Compaq Server Diagnostics.

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies