SOFTPAQ NUMBER:  SP17005
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Power Management 32
VERSION:  4.00 Rev. H
LANGUAGE:  Korean (KR)

CATEGORY:  Operating System Enhancements

DIVISIONS:  Commercial Portables

PRODUCTS AFFECTED:  Compaq Evo N400c Series
                    Compaq Armada E500 Series
			  Compaq Armada V300 Series
			  Compaq Armada E700 Series
			  Compaq Armada M700 Series
			  Compaq Armada M300 Series
			  Compaq Armada 7400 Family
			  Compaq Armada 7800 Family
			  Compaq Armada 1700 Family
			  Compaq Armada 1750 Family
			  Compaq Armada 3500 Family
			  Compaq Armada 7700 Series
			  Compaq Armada 7300 Series
			  Compaq Armada 1500 Family
			  Compaq Armada 4100 Series
			  Compaq Armada 4200 Series

OPERATING SYSTEM:  Microsoft Windows Millennium Edition (Me)
                   Microsoft Windows 2000 
                   Microsoft Windows NT 4.0 with Service Pack 3 
                   Microsoft Windows 98 
                   Microsoft Windows 95 OSR2 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  May 21, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.0

SUPERSEDES:  SP16694

DESCRIPTION:  Provides power management features for Compaq Armada and Evo
portable computers.  Gives flexibility to balance battery life and machine
performance.

ENHANCEMENTS/FIXES:
- Disabled standby during calibration to allow calibration to finish in a
  timely manner. 

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates 3 new directory
folders in the download directory.  All files are unpacked into these 
newly created directory folders.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To create the optional installation diskette(s), run MAKEDISK.BAT
and follow the on-screen instructions.

5. To install, run SETUP.EXE from either the DISK1 subdirectory (created
in step 2 above) or from diskette #1 (if you created diskettes in step 4
above).  Follow the directions on the screen.

6. After the installation is completed, you may delete the directory 
folders created in step 2 if you wish.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies