SOFTPAQ NUMBER:  SP14467
PART NUMBER:  
FILE NAME:  SP14467.tgz
TITLE:  
Compaq Health and Wellness Driver and the Compaq Integrated
Management Log (IML) Viewer Application, Compaq Remote 
Insight Driver, Compaq Management Agents for 
Linux

VERSION:  
Compaq Health and Wellness Driver	1.2.0-1
Compaq IML Viewer Application

Compaq Remote Insight Driver		1.0.0-7

Compaq Foundation Agents		4.90-1

Compaq Server Agents			4.90-1

Compaq Storage Agents			4.90-1

Compaq NIC Agents			4.90-1
	
LANGUAGE:  English

CATEGORY:  Software Solutions

DIVISIONS: Mainstream Servers

PRODUCTS AFFECTED:
ProLiant DL320 
ProLiant DL360
ProLiant DL380
ProLiant DL580
ProLiant ML330
ProLiant ML350
ProLiant ML350 1 GHz
ProLiant ML370
ProLiant ML530
ProLiant ML570

OPERATING SYSTEM: 
The components are supported according to the following matrix: 

Compaq Health and Wellness Driver	RedHat 6.2, 7.0
and the Compaq IML Viewer Application	SuSE Linux 6.3, 7.0
					TurboLinux Server 6.0.5
					Caldera OpenLinux eServer 2.3

Compaq Remote Insight Driver		RedHat 6.2, 7.0

Compaq Foundation Agents		RedHat 6.2, 7.0 

Compaq Server Agents			RedHat 6.2, 7.0

Compaq Storage Agents			RedHat 6.2, 7.0

Compaq NIC Agents			RedHat 7.0

SYSTEM CONFIGURATION:  
All shipping configurations

PREREQUISITES:  N/A

EFFECTIVE DATE:  December 14, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.x

SUPERSEDES:  N/A

DESCRIPTION:  
This SoftPaq contains RPMS used to provide health management
capabilities and remote management capabilities for all 
supported Linux server systems.  The SoftPaq includes 
README files with descriptions of each distribution and
step-by-step instructions to perform the installation.

Enhancements:
- Provides the Compaq Health and Wellness Driver which monitors
operational data of the server and logs abnormal conditions.
- Provides the Compaq IML Viewer Application which allows monitoring 
and manipulation of logged system events, critical errors, power-on
messages, memory errors, and any catastrophic hardware or software 
errors that typically cause a system to fail. 
- Provides the Compaq Remote Insight Board Driver and Compaq 
Management Agents which allow remote monitoring of the operational 
data of the server.

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and 
change to that directory.  The file that is downloaded is a
tgz file with a filename based on the SoftPaq Number above.

2.  From that drive and directory, type

	tar zxvf sp14467.tgz

to extract the downloaded file.  The RPM and README 
files will be created in the current directory.

3.  After the RPM files have been created, you may delete 
the SoftPaq file downloaded in step 1.

4. The RPM files must be installed in the following order,
as later RPM files may have dependencies on previous files.
Please consult the appropriate README file for specific 
installation and dependency information before installing
each individual RPM.

To install the RPM files, login as root and type

	rpm -ivh cpqhealth-1.2.0-1.i386.rpm
	rpm -ivh cpqrid-1.0.0-2.i386.rpm
	rpm -Uvh cmafdtn-4.90-1.i386.rpm

The storage and NIC agents also use the storage and NIC 
drivers.  The latest versions of these drivers may be found
at http://www.compaq.com/support/files/.

The foundation agents require the ucd-snmp RPM to be installed, 
version 4.1.1 for Red Hat 6.2 or version 4.1.2 for Red Hat 7.0.  
The source RPMs are required to rebuild "/usr/sbin/snmpd" to
include Compaq Management Agents.  These source RPMs can be 
found on the Red Hat SRPM CD or can be downloaded from the
following URLs

For UCD SNMP 4.1.1:
ftp://rpmfind.net/linux/redhat/redhat-6.2/SRPMS/i386/SRPMS/ucd-snmp-4.1.1-2.src.rpm

Installation Commands:
	rpm -i ucd-snmp-4.1.1-2.src.rpm
	cd /usr/src/redhat/SOURCES
	tar xvzf ucd-snmp-4.1.1.tar.gz

For UCD SNMP 4.1.2:
ftp://rpmfind.net/linux/redhat/redhat-7.0/SRPMS/i386/SRPMS/ucd-snmp-4.1.2-8.src.rpm

Installation Commands:
	rpm -i ucd-snmp-4.1.2-8.src.rpm
	cd /usr/src/redhat/SOURCES
	tar xvzf ucd-snmp-4.1.2.tar.gz
	patch -p0 < ucd-snmp-4.1.2-rpm40.patch

Once the source RPMs are installed, run the following script:

	/opt/compaq/foundation/etc/snmpdbld

To complete the installation of the agents, change back to
the directory containing the RPMs and type


	rpm -ivh cmasvr-4.90-1.i386.rpm
	rpm -ivh cmastor-4.90-1.i386.rpm
	rpm -ivh cmanic-4.90-1.i386.rpm

5. For additional information on use, installation, and 
configuration, consult the appropriate README or the
appropriate How-To document:
ftp://ftp.compaq.com/pub/products/servers/linux/linuxhealth.pdf
provides information on installation and use of the Compaq Health 
and Wellness Driver and the Compaq Integrated Management Log 
Viewer.
ftp://ftp.compaq.com/pub/products/servers/linux/Linux.pdf
provides information on the installation, use, and configuration
of the Compaq Management Agents.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies