SOFTPAQ NUMBER: SP10554 PART NUMBER: 276816-402, 276817-402 FILE NAME: N/A TITLE: Peripheral Adapter Support Software for VINES 6.x, 7.x and 8.x VERSION: 3.09 LANGUAGE: English CATEGORY: Drivers DIVISIONS: Servers PRODUCTS AFFECTED: All Compaq Server products OPERATING SYSTEM: Banyan VINES 6.x, 7.x and 8.x SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: January 06, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP10553 DESCRIPTION: The Peripheral Adapter Support Software for VINES is a collection of VINES 6.x, 7.x & 8.x software components which provide support for Compaq Servers and Options. Y2K Compliance Banyan VINES 8.50(1) and above are Y2K compliant Operating Systems. Peripheral Adapter Support Software Ver 3.08 and above is Y2K compliant. VINES 8.x Constraints --------------------- The PAT SSD 3.09 is supported in Uni-Processor mode as Banyan VINES OS does not support multiple processors. To enable use of '/etc/soft_parms' as a startup file for "cpqsm" entries, VINES ver 8.5 with the patch V99004.zip or VINES ver 8.6 is required as a minimum OS revision. CHANGES FROM PREVIOUS RELEASE Rev 3.04 : Compaq SMART Array Controller Driver Enhanced the existing SMART-2/SMART 3100ES/SMART 3200 SMART 221 Array Controller driver to support SMART Integrated Array Controller. Rev 1.00 : Compaq SMART Integrated Array Controller Driver to support the SMART Array Controller. Rev 2.02 : Compaq SMART-2 and Fibre Channel Configuration Display Utility The existing utility has been enhanced to display SMART Integrated Array Controller information on logical configuration. Rev 1.24 : Compaq Fast-Wide and Wide-Ultra Controller Driver Enhanced the existing Fast-Wide and Wide-Ultra SCSI Driver to support Integrated Compaq 64-Bit Dual Channel Wide Ultra-2 SCSI Controllers. Rev 1.23 : Compaq Enhanced IDE controller driver Corrected a problem seen on Compaq CD-ROM drive with serial number 127434-708. Rev 1.05 : IDA Agent Enhanced to support SMART Integrated Array Controller. 2.0 SOFTWARE COMPONENTS The software components contained in the SSD are device drivers and support utilities. A device driver is software that the operating system uses to set up and communicate with hardware devices. The following list identifies each driver and utility contained on the SSD as well as the Compaq specific hardware which it supports: Drivers and controllers supported: Rev 1.02 : Compaq Fibre Channel Controller driver Supports Compaq Fibre Channel (EISA / PCI) controllers Supports events notifications on VINES 6.x, 7.x & 8.x platforms. 1) Rev 1.00 : Compaq Fibre Channel Host Controller supplement Driver Provides Additional Support required for Compaq Fibre Channel (EISA / PCI) Controllers on ISA / PCI Systems on VINES 6.x, 7.x & 8.x platforms. Rev 1.02 : Remote Insight Board Driver for Banyan VINES 6.20(0) and above Rev 3.04 : Compaq SMART Array Controller Driver Supports Compaq SMART-2 (PCI/EISA) controllers Supports Compaq SMART-2/SL controllers Supports Compaq SMART-2/DH controllers Supports Compaq SMART 3100ES Controllers Supports Compaq SMART 3200 Controllers Supports Compaq SMART 221 Controllers. Supports Compaq SMART Integrated Array Controllers. Supports logging of events for Drive Array Subsystem on VINES 6.00, 6.20 & above, 7.x & 8.x platforms. 1) Rev 1.02 : Compaq Additional Package required for Compaq SMART Array Controller Driver on VINES ver. 6.00, 6.20 & above, 7.x & 8.x platforms 2) Rev 1.00 : Compaq SMART Integrated Array Controller Driver Driver added to support the SMART Integrated Array Controller. Rev 1.24 : Compaq Fast-Wide and Wide-Ultra Controller Driver Supports Integrated Compaq 32-Bit Fast-Wide SCSI-2 and add-on (EISA / PCI) controllers Supports Integrated Compaq Wide-Ultra SCSI and add-on (PCI) controllers Supports Integrated Compaq Dual Channel Wide-Ultra SCSI-3 and add-on (PCI) controllers Supports Integrated and Add-on Compaq 64-Bit Dual Channel Wide Ultra-2 SCSI Controllers Supports logging and mailing of events for SCSI Subsystem on VINES 6.x, 7.x & 8.x platforms. 1) Rev 1.00 : Compaq Supplemental Fast-Wide and Wide-Ultra controller Driver on VINES 6.x, 7.x & 8.x platforms. Rev 1.23 : Compaq Enhanced IDE controller driver Supports IDE/EIDE hard drives and EIDE CD-ROM on VINES 6.x, 7.x & 8.x platforms. Rev 2.03 : Compaq Wellness driver Supports server health monitoring features on VINES 6.x platforms. Rev 3.02 : Compaq Wellness driver Supports server health monitoring features on VINES 7.x and 8.x platforms. Rev 1.01 : Compaq Integrated Management Log driver Supports logging of events that occur in a system or its components. Rev 1.00 : Banyan IDA, IDA-2, IAES & SMART SCSI Array controller driver Utilities provided in this SSD : 1) Rev 1.01 : RI Agent This runs as a daemon and interacts with the RIB Driver, Health and IDA Agents to send SNMP Traps to the Remote Insight Board. Additional executable of RI Agent is included which is compatible with Wellness driver v1.0 2) Rev 1.03 : Health Agent This runs as a daemon and monitors the Correctable Memory Errors, counts and informs the RI Agent to send an SNMP Trap whenever a Correctable Memory Error occurs. This agent interacts with Wellness driver and supports monitoring of various server components and sends Mail Alert notification whenever a status change is detected on any of the server components. This feature will be available only if the Compaq Wellness driver version 2.00 or above is installed in your system. Additional executable for Health Agent is included which is compatible with Wellness driver version 1.0 3) Rev 1.05 : IDA Agent This runs as a daemon and monitors the status of the Drive Array configured on the server. It informs the RI Agent to send an SNMP Trap in case there is any change in the status of the logical, physical and spare drives. This agent interacts with IDA driver , SMART-2 driver and the Fibre channel driver and supports monitoring of drives, Fans, Power-supplies and overheat condition in the subsystem connected to IDA , Compaq SMART-2 or Compaq SMART Integrated or Fibre channel family of Array controller and sends Mail Alert notification if any event is detected. 4) Rev 1.10 : Compaq ULS agent (CPQULS) This runs as a deamon and monitors the status of devices, fans, power suplies and overheat condition of the SCSI subsystem.This agent interacts with the Compaq Fast-Wide and Wide-Ultra Controller Driver and sends Mail Alert notification in case of any events detected. 5) Rev 1.10 : Compaq Ultra utility (CPQULTRA) This is a text based utility which allows the user to monitor the status of all the SCSI Controllers and devices present in the system. 6) Rev 1.01 : RIVIEW This is a curses based utility which allows the user to monitor the Drive Array and Correctable Memory status on the server. 7) Rev 1.0 : RICONFIG This is a curses based utility which allows the user to view and on-line configure the Remote Insight Board. 8) Rev 2.02 : Compaq SMART-2 and Fibre Channel Configuration Display Utility On-line utility to display SMART-2, Fibre Channel Array and SMART Integrated Array family of controller information for Logical drives. Run 'cpqs2' at Unix prompt. "cpqs2 -h" gives the available options for the utility. 9) Rev 1.01 : S. M. A. R. T (IDE/EIDE and SCSI) Agent Supports monitoring of S. M. A. R. T capable IDE/EIDE and SCSI drives with Mail Alert Notification to the system administrator on a pre-failure notification. 10) Rev 1.04 : Compaq System Management Utility Server based utilities which support : Notification of network, storage and system health failure events through Mail alerting mechanism. S. M. A. R. T support utility. Dynamic enable/disable of driver debug messages. Menu option to launch existing utilities - cpqs2, cpqnet, riview, riconfig, cpqultra View critical/correctable error log View/Save cpqnetlog and cpqs2 output View Integrated Management Log To launch Compaq System Management Utility, run 'cpqsm' at Unix prompt. NOTE : The version of 'cpqnetlog' contained on "Ver 2.04 LAN Adapter Support Software for VINES 6.0 and 7.0" or above diskette is required to produce mail alerting for Redundant Backup Pair and Standalone network interface controller failure/recoveries. For supported controller names please refer to README.RBP file available on LAN Adapter Support Software for VINES 6.0 and 7.0, Documentation Diskette. HOW TO USE: 1. Obtain two formatted 1.44 MB diskettes. 2. Download the Softpaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP10554.EXE. 3. From that drive and directory, execute the SoftPaq file: SP10554 [ENTER] The following files should be created: 276816US._01 276816US._02 QRST5.EXE SP10554.TXT 4. To create the diskettes, at the DOS prompt run : QRST5 [ENTER] Follow the on-screen instructions, which prompt you when to insert the DOS formatted diskettes and allow you to print labels. 5. After the SSD diskettes are created, you may delete the downloaded file SP10554.EXE and the other files it creates on the download directory if you wish. 6. Insert the documentation diskette(the second diskette) into drive A and perform one of the following to view the installation instructions : From DOS prompt enter "a:\readme" or Boot the system with the diskette in the drive A: Copyright 2000, Compaq Computer Corporation. All rights reserved. COMPAQ, Registered U.S. Patent and Trademark Office.