FILE NAME: mptlinux-3.02.83.20-2.rhel4.i686.rpm TITLE: HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe HBA series (x86/AMD32) Driver for Red Hat Enterprise Linux 4 (x86) VERSION: 3.02.83.20-2 LANGUAGE: English CATEGORY: Storage Controllers DIVISION: N/A OPERATING SYSTEM: Red Hat Enterprise Linux 4 (x86) ELECTRONIC DISTRIBUTION ALLOWED: Yes DESCRIPTION: This RPM is used to provide binary driver modules that have been pre-built for Red Hat Enterprise Linux 4 (x86) to enable the HP ProLiant 64-bit/133-MHz Dual Channel Ultra320 SCSI HBA and HP U320 64-Bit Single Channel SCSI G2 HBA, HP U320 64-Bit Single Channel SCSI HBA, HP 8 Internal Port SAS/SATA HBA with RAID and HP 4 Internal Port SAS HBA with RAID, HP SCxxXe and SCxxGe series of HBA. This RPM provides a customer friendly approach to install a pre-built binary driver. FIXES - None. ENHANCEMENTS - Added support for Update 5. The kernels of Red Hat Enterprise Linux 4 (x86) supported by this binary rpm are: 2.6.9-5.EL 2.6.9-5.0.3.EL 2.6.9-11.EL 2.6.9-22.EL 2.6.9-34.EL - Red Hat Enterprise Linux 4 Update 3 (x86) 2.6.9-42.EL - Red Hat Enterprise Linux 4 Update 4 (x86) 2.6.9-55.EL - Red Hat Enterprise Linux 4 Update 5 (x86) INSTALLATION To install or upgrade the driver type: # rpm -ivh mptlinux-3.02.83.20-2.rhel4.i686.rpm Setup is now complete. Please REBOOT your computer NOW!! CAUTION: If ProLiant Support Pack version 7.40 or older is installed, please install mptlinux-3.02.83.20-2.rhel4.i686.rpm prior to rebooting the system. Not applicable for SLES 10. Note: If HP System Insight Manager support is required, please install the mptlinux-3.02.83.20-2.rhel4.i686.rpm after the OS has completed its installation process and is successfully booting. NOTES MD5SUM: ed385cde051478c67e7b772f5418622f Customer Service ---------------- For support, please send email to contact.hp@hp.com. Copyright 2002-2007 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.