FILE NAME: mptlinux-4.00.06.01-1.sles10.i586.rpm TITLE: HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe HBA series (x86/AMD32) Driver for SUSE LINUX Enterprise Server 10 (x86) VERSION: 4.00.06.01-1 LANGUAGE: English CATEGORY: Storage Controllers DIVISION: N/A OPERATING SYSTEM: SUSE LINUX Enterprise Server 10 (x86) ELECTRONIC DISTRIBUTION ALLOWED: Yes DESCRIPTION: This RPM is used to provide binary driver modules that have been pre-built for SUSE LINUX Enterprise Server 10 (x86) to enable the HP ProLiant 64-bit/133-MHz Dual Channel Ultra320 SCSI HBA and HP U320 64-Bit Single Channel SCSI G2 HBA, HP U320 64-Bit Single Channel SCSI HBA, HP 8 Internal Port SAS/SATA HBA with RAID and HP 4 Internal Port SAS HBA with RAID, HP SCxxXe and SCxxGe series of HBA. This RPM provides a customer friendly approach to install a pre-built binary driver. FIXES - Fixed an issue where a degraded RAID 1 volume will be mounted as ‘read-only’ when an I/O was sent to the volume at the time of failure. ENHANCEMENTS - Added support for Service Pack 1. - New “on the fly” enabling of debug logging via SysFS located in /sys/class/scsi_host/host#/debug_level. The kernels of SUSE LINUX Enterprise Server 10 (x86) supported by this binary rpm are: 2.6.16.21-0.8 2.6.16.27-0.6 2.6.16.46-0.12 - SUSE LINUX Enterprise Server 10 SP 1 (x86) INSTALLATION To install or upgrade the driver type: # rpm -ivh mptlinux-4.00.06.01-1.sles10.i586.rpm Setup is now complete. Please REBOOT your computer NOW!! Note: If HP System Insight Manager support is required, please install the latest Proliant Support Pack and mptlinux-4.00.06.01-1.sles10.i586.rpm after the OS has completed its installation process and system has rebooted. NOTES MD5SUM: 9be43c9b86ddf86a05411987ec8e43d1 Customer Service ---------------- For support, please send email to contact.hp@hp.com. Copyright 2002-2007 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.