SOFTPAQ NUMBER: N/A

PART NUMBER: N/A

FILE NAME: mptlinux-2.05.16.01-12.ul10.i586.dd.gz

TITLE: Driver Diskette for HP ProLiant 64-Bit/133-MHz Ultra320 Adapter (x86 & AMD32) for SUSE LINUX Enterprise Server 8 (x86)

VERSION: 2.05.16.01-12

LANGUAGE: English

CATEGORY: Driver Diskettes

DIVISION: N/A

OPERATING SYSTEM: United Linux 1.0 / SUSE LINUX Enterprise Server 8

EFFECTIVE DATE: Mar 24, 2005

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: N/A

SUPERSEDES: N/A

SUPPORTED DEVICES / SERVERS
DL760 G2
DL760
DL740
DL580 G2
DL580
DL585
DL560
DL380 G4
DL380 G3
DL380 G2
DL385
DL360 G4/G4p
DL360 G3
DL360 G2
DL320 G3
DL320 G2
ML750
ML570 G3
ML570 G2
ML530 G2
ML530
ML370 G4
ML370 G3
ML370 G2
ML350 G4
ML350 G3
ML350 G2
ML330 G3
ML330 G2
ML310 G2
ML310
ML150

HP ProLiant 64-Bit/133-MHz Dual Channel Ultra320 Adapter
HP ProLiant 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
HP ProLiant 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA

Supported kernels
2.4.21-138 - UnitedLinux 1.0 / SUSE LINUX Enterprise Server 8 SP3 (x86)

FIXES

KNOWN ISSUES:
   - Using this dud will cause extra kernel entries to be placed in /lib/modules.  This is the result of too many kernel directories being
     present in the dud.  This will be fixed in the next release.

ENHANCEMENTS

CREATING A DRIVER DISKETTE

There are two methods to create the Installation Diskette:

MAKING A DISKETTE UNDER MS-DOS:

1) Save the "mptlinux-{version}-(release).{distro}.{buildtype}.dd.gz" file into a temporary directory. 
Use WINZIP to extract "mptlinux-{version}-(release).{distro}.{buildtype}.dd" 
from this file into the same directory.
Please ensure that "mptlinux-{version}-(release).{distro}.{buildtype}.dd" is a DOS 8.3 name. 

2) Use the "rawrite" utility which is included on the United Linux 1.0 CD in the "dosutil" directory.

3) Label a blank, formatted 3.5-inch diskette as "ProLiant 64-Bit/133-MHz Ultra320 Adapter Driver Diskette". 
Next, insert the diskette in the diskette drive. Then, use the following commands 
(assuming your ProLiant Disk Image is at the location c: and your CD-ROM is drive d:)

	C:\> d:\dosutils\rawrite 

Enter disk image source file name: mptlinux-{version}-(release).{distro}.{buildtype}.dd
Enter target diskette drive: a: 
Please insert a formatted diskette into drive A: and press --ENTER-- : Enter


MAKING A DISKETTE UNDER A LINUX-LIKE OS:

1)  Save the "mptlinux-{version}-(release).{distro}.{buildtype}.dd.gz" file into a temporary directory. Use GUNZIP to extract
"mptlinux-{version}-(release).{distro}.{buildtype}.dd" from this file into the same directory

2)  To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write
to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux)

3)  First, label a blank, formatted diskette appropriately (ProLiant 64-Bit/133-MHz Ultra320 Adapter Driver Diskette). Insert the diskette
into the floppy drive, but DO NOT issue the mount command:

	# dd if=mptlinux-{version}-(release).{distro}.{buildtype}.dd  of=/dev/fd0 bs=1440k

4)  This command creates a diskette containing the image of the input file (Driver Diskette image) to an output
file (Floppy Diskette). To make another diskette run the same "dd" command again.

NOTES

Feedback 
-------- 
To provide kernel/driver development feedback send email to
iss_storagedev@hp.com

Customer Service 
---------------- 
For support, please send email to contact.hp@hp.com. 

Copyright 2002 - 2005 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.