SOFTPAQ NUMBER: N/A

PART NUMBER: N/A

FILE NAME: aic7xxx-6.3.11-3.rhel4.i686.dd.gz

TITLE: HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver Diskette for Red Hat Enterprise Linux 4 (AMD32/x86)

VERSION: 6.3.11-3

KEY FILE: 

LANGUAGE: English

CATEGORY: Software - Driver Diskettes

DIVISION: N/A

OPERATING SYSTEM: Red Hat Enterprise Linux 4 (AMD32/x86)

PREREQUISITES: N/A

EFFECTIVE DATE: November 15, 2005

ELECTRONIC DISTRIBUTION ALLOWED: YES

SOFTPAQ UTILITY VERSION: N/A

SUPERSEDES: N/A

SUPPORT SYSTEMS/DEVICES:
  HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller

DESCRIPTION:
~~~~~~~~~~~~
This driver diskette image provides the binary driver modules pre-built for Red Hat Enterprise Linux 4 (AMD32/x86) to enable the HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller.

Using a driver diskette at Red Hat Enterprise Linux 4 (AMD32/x86) installation time allows the most up-to-date driver version included in the diskette to be used, rather than the default driver version contained in the Linux Red Hat Enterprise Linux 4 (AMD32/x86) installation CD.

FIXES:
~~~~~~

KNOWN ISSUES:
~~~~~~~~~~~~~

ENHANCEMENTS:
~~~~~~~~~~~~~
The kernels of Red Hat Enterprise Linux 4 supported by this driver diskette
are:
2.6.9-5.EL - Red Hat Enterprise Linux 4.0 (x86)
2.6.9-11.EL - Red Hat Enterprise Linux 4.0 Update 1 (x86)
2.6.9-22.EL - Red Hat Enterprise Linux 4.0 Update 2 (x86)

CREATING A DRIVER DISKETTE
--------------------------
There are two methods to create the Installation Diskette:


MAKING A DISKETTE UNDER MS-DOS:
-------------------------------
1) Save the "[package name]" file into a temporary directory. 

2) Use the "rawrite" utility which is included on the Red Hat Enterprise Linux 4 (AMD32/x86) CD.

3) Label a blank, formatted 3.5-inch diskette as "HP Red Hat Enterprise Linux 4 (AMD32/x86) Driver Diskette". Next, insert the diskette in the diskette drive. Then, use the following commands (assuming your Disk Image is at the location c: and your CD-ROM is drive d:)

	C:\> d:\dosutils\rawrite 

Enter disk image source file name: aic7xxx-6.3.11-3.rhel4.i686.dd.gz Enter target diskette drive: a: 

Please insert a formatted diskette into drive A: and press --ENTER-- : Enter


MAKING A DISKETTE UNDER A LINUX-LIKE OS:
----------------------------------------
1)  Save the "aic7xxx-6.3.11-3.rhel4.i686.dd.gz" file into a temporary directory. 

2)  To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux)

3)  First, label a blank, formatted diskette appropriately (HP Red Hat Enterprise Linux 4 (AMD32/x86) Driver Diskette). Insert the diskette into the floppy drive, but DO NOT issue the mount command:

	# dd if=aic7xxx-6.3.11-3.rhel4.i686.dd.gz of=/dev/fd0 bs=1440k

4)  This command creates a diskette containing the image of the input file (aic7xxx-6.3.11-3.rhel4.i686.dd.gz) to an output file (of=/dev/fd0) using the diskette size of 1440k (1.44MB).  To make another diskette label that diskette, and run "dd" again, specifying the correct input file.


INSTALLATION
------------
To install Linux using this "HP Red Hat Enterprise Linux 4 (AMD32/x86) Driver Diskette", boot your Linux machine with your Red Hat Enterprise Linux 4 (AMD32/x86) CD1 in your CD-ROM Drive.

A menu will be displayed, prompting for your input. Type the following line of code to inform the operating system of the diskette:

	# linux updates dd

Red Hat Enterprise Linux 4 (AMD32/x86) will prompt for the Updates Diskette and the HP Red Hat Enterprise Linux 4 (AMD32/x86) Driver Diskette during the installation procedure. 

Customer Service
---------------------------------------------------
For support, please send email to contact.hp@hp.com

Copyright 2005, Hewlett_Packard Development Company, L.P. Product names mentioned heren may be trademarks and/or registered trademarks of their respective companies.