C O M P A Q (R)  C O M P U T E R  C O R P O R A T I O N

                         Compaq Support Paq for
                         Microsoft Windows 2000
                 

1.  INTRODUCTION

This file contains information regarding use of the Compaq Support Paq for
Microsoft Windows 2000.  The following information is provided:

    Support Paq Installation
    Component Usage
    Log File Usage

2.  SUPPORT PAQ INSTALLATION
 
The primary method for installing the Support Paq is to run the SETUP.EXE
program included with the Support Paq.  By default, all software is selected 
for installation.  In most circumstances, this default selection should not be
altered, and installation is as simple as pressing the "Install" button.  Even
when selected, only software that is appropriate for the system it is being run
on will actually be installed.  Press the "Install" button to proceed with the
installation.  After installation of the appropriate software the utility will
display any installation failures.  For more information on the usage of
SETUP.EXE, refer to the white paper or access the help system while running
SETUP.EXE.
 
A BP000141.CMD file is also provided with the Support Paq for use
in installing the Support Paq from a command prompt without user interaction.
As with the SETUP.EXE program, all software appropriate for the system it is
being run on will be installed.
 
The Compaq Support Paq for Microsoft Windows 2000 contains numerous files.  All
files must be present in the same directory as the SETUP.EXE program in 
order for the Support Paq to be installed properly.
 
A console version of the setup application (SETUPC.EXE) is also provided as a
way to script installations of the Support Paq or components.  For more
information on its usage, refer to the help available by running setupc.exe /?.

3.	COMPONENT USAGE

In addition to the SETUP.EXE program mentioned above, the Support Paq contains
individual .EXE files corresponding to the various components that make up the
Support Paq. If necessary, these components can be installed individually or
their contents extracted to a floppy diskette for use during OS installation.

To install an individual component just run the appropriate CPxxxxx.EXE file 
and chose the "Install" button.

To extract the contents of a component to diskette run the appropriate 
CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install" 
button.

3.1 COMPONENT CONFIGURATION
 
Component files now offer optional support configuration before they are
installed. The optional support configuration allows component-specific 
settings to be written into the .EXE file for availability during installation.
 
Configuration is performed using the functionality provided by SETUP.EXE.
When SETUP.EXE is launched, you will be able to all of the components that
support or require configuration in the tree view of the main window.  To
configure a component, right-click on an item and select "Configure..."
from the context-menu.  For more information, consult the Compaq Support Paq
(CSP) and Deployment Utilities User Guide. 
 
NOTE:  Component Configuration requires that the Smart Components must be
in a write-accessible location. A CD or read-only network share is not supported.
If you have obtained this Support Paq on the Smart Start CD, copy the entire
contents of the Support Paq directory to the local hard drive or a network share
and make sure the read-only attributes have been cleared from all of the files.


CP002154.EXE     Compaq iLO Advanced System Management Controller Driver for Windows 2000
CP002207.EXE     Compaq Advanced System Management Controller Driver for Windows 2000
CP002208.EXE     Compaq Integrated System Management Controller Driver for Windows 2000
CP002209.EXE     Compaq System Management Controller Driver for Windows 2000
CP002255.EXE     Compaq 32-Bit SCSI Controller Driver for Windows 2000
CP002261.EXE     Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows 2000
CP002126.EXE     Compaq Drive Array Driver for Windows 2000
CP001622.EXE     Compaq Smart Array-2 Controllers Driver for Windows 2000
CP002127.EXE     Compaq Smart Array 5x Adapter Support for Windows 2000
CP002128.EXE     Compaq StorageWorks Fibre Channel Support for Windows 2000
CP002064.EXE     Compaq CMD 0649 Ultra DMA IDE Controller Driver for Windows 2000
CP002074.EXE     Compaq Integrated Ultra ATA-100 Dual Channel Driver for Windows 2000
CP002131.EXE     Compaq ProLiant Storage System Support for Windows 2000
CP002312.EXE     Compaq Drive Array Notification for Windows 2000
CP001572.EXE     Compaq Array Redundancy Software for Windows 2000
CP002134.EXE     Compaq Remote Monitor Service for Windows 2000
CP002135.EXE     Compaq PCI Hot Plug Controller Driver for Windows 2000
CP002272.EXE     Compaq Remote Insight Board Driver for Windows 2000
CP002163.EXE     Compaq Integrated Lights-Out Management Interface Driver for Windows 2000
CP002164.EXE     Compaq Remote Insight Lights-Out II Board Driver for Windows 2000
CP001709.EXE     Compaq ATI RAGE IIC Video Controller Support for Windows 2000
CP002168.EXE     Compaq Rack Infrastructure Interface Service for Windows 2000
CP001684.EXE	 Compaq Legacy Port Configuration Component for Windows 2000
CP002140.EXE     Compaq Integrated Management Dispay Utility for Windows 2000
CP002266.EXE     Compaq Integrated Management Log Viewer for Windows 2000
CP002142.EXE     Compaq Power Supply Viewer for Windows 2000
CP002143.EXE     Compaq Power Down Manager for Windows 2000
CP002144.EXE     Compaq Enhanced Integrated Management Display Service for Windows 2000
CP002099.EXE     Compaq Array Configuration Utility for Windows 2000
CP002146.EXE     Compaq NetFlex/Netelligent Adapter Driver for Windows 2000
CP002227.EXE     Compaq Ethernet or Fast Ethernet NIC NT Driver for Windows 2000
CP002001.EXE     Compaq Gigabit Ethernet NIC NT Driver for Windows 2000
CP002013.EXE     Compaq NC67xx/NC77xx Gigabit Ethernet NIC Driver for Windows 2000
CP002213.EXE     Compaq Network Teaming and Configuration for Windows 2000
CP001890.EXE     Compaq Version Control Agent for Winodws
CP002214.EXE     Compaq Foundation Agents for Windows
CP002215.EXE     Compaq Server Agents for Windows
CP002216.EXE     Compaq Storage Agents for Windows
CP002217.EXE     Compaq NIC Agents for Windows
CP001892.EXE     Compaq Survey Utility for Windows

4.  LOG FILE USAGE

Progress and results of the installation of all software included in the Support
Paq is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log.  This file can be
viewed with any text editor.  Information for subsequent installations is
appended to this log file, providing a chronological history of installation
activity for all software installed by the Support Paq installation utilities.

----------------------------------------------------------------
Copyright 2002, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.