FILE NAME:  ml110g3biossinglechannel-5.05.18-1.zip

TITLE :  BIOS for HP Single Channel U320 SCSI HBA G2 for HP Proliant ML110 G3 Server.

DESCRIPTION:  This zip file contains BIOS for HP Single Channel U320 SCSI HBA G2.

CATEGORY:  BIOS - System ROM

VERSION:  5.05.18.02   

SUPPORTED LANGUAGE(S):  English

SUPPORTED HARDWARE:   HP ProLiant ML110 G3 Server.

SUPPORTED OPERATING SYSTEM:  Microsoft Windows Server 2000, Microsoft  Windows Server 2003 (32 bit), Microsoft Windows Server 2003 (64 bit), Microsoft Windows Server SBS, Red Hat Enterprise Linux 4 (32 bit), Red Hat Enterprise Linux 4 (64 bit), Novell Netware 6.5 SBS.

EXPECTED RELEASE DATE:  15 Aug 2005


PUBLIC NOTES:

FIXES AND/OR ENHANCEMENTS:  
 Resolved an issue in which the SCSI hard drive could not be detected in a system configured with two U320 SCSI HBAs and a tape drive in OBDR mode.

PREREQUISITES: 

INSTALLATION INSTRUCTIONS:
1. Insert a USB disk in the USB port.

2. Unzip the above file.

3. Download the Smart Component (ml110g3biossinglechannel-5.05.18-1.exe) to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable. 

4. From that drive and directory, execute the downloaded file. 

5. On executing the downloaded file, the user is prompted to enter the drive letter to be overwritten.  Enter the drive letter of the USB disk. The utility creates a bootable USB disk and copies the files over to the USB disk.

6. Reboot the ML110 G3 Server with the USB disk. Make sure the BIOS setting allows booting from the USB disk.

7. Follow the on-screen instructions to finish the flashing of the firmware for the HP Single Channel U320 SCSI HBA G2 card.