ANA-5910x
Quick Installation guide for Windows95:



Computers equipped with PCI buses should automatically detect and configure
PCI-compliant adapters, preventing you from having to manually add the network
adapter.

After putting the network adapter in the computer, start Windows 95.

1. The "New Hardware Found" dialog box appears.  Select Driver from disk
   provided by hardware manufacturer.
 
 Note:  If the "New Hardware Found" dialog box doesn't appear, you'll need to
 configure the adapter using the Add New Hardware" wizard in the Windows 95
 Control Panel.
 
2. Insert the Adaptec ALANE Drivers for Windows 95 disk in a floppy drive and
   click OK.  Windows 95 will copy the driver files to your computer.
3. Restart your computer when prompted by Windows 95.


If installation failed...

Some PCI computers may require manual driver installation, follow the steps
below:

1. Click Start icon.
2. Select Settings/Control Panel.
3. Select Network icon.
4. Select ADD.
5. Double click on Adapter.
6. Select "Have Disk".
7. Insert the Adaptec ALANE Drivers for Windows 95 Diskette into your floppy
   drive.
8. Specify the drive letter of the diskette drive that contains the ATM
   software, then select OK.
9. Select "Adaptec LANE Adapter - ANA-59x0 (ELAN1)" for installation of the
   first ELAN.
10. Select OK in Network Box.
11. Select Restart.

Adapter Configuration:

1.  Click the Start icon.
2.  Select Settings/Control Panel.
3.  Select Network.
4.  Double click "Adaptec LANE Adapter..." in the "Network" window.
5.  Select Advanced.  All of the available parameters for the adapter can be
    set via this configuration screen.  When you have made all of the required
    changes, save the changes, and restart the computer to allow them to take
    effect.
Removing drivers:

1.  Click the Start icon.
2.  Select Settings/Control Panel.
3.  Select Network.
4.  Select "Adaptec LANE Adapter..." 
5.  Select Remove.
6.  Select OK in the "Network" box.
7.  Restart the computer to complete the removal.




Advanced options:

Elan Name 
  This field is optional.  Specify a character string if the switch supports
  this feature.
LAN Type
  This should be "802.3" if Ethernet Emulation is to be enabled in the LANE
  driver.
MTU Size
  This should be "9234" or "1516".  Note:  When choosing 9234, make sure the
  LES/BUS supports it.
Peak Cell Rate
  The valid values are 0-353208 (155 Mbits).  The value 0 default to full line
  rate of the the NIC.  Note: for 25 Mbits use PCR value of 58962.
Port Index
  Default value is 0 (only one adapter is supported currently).
Server Address
  Address of the LECS or LES.  Should be a 20 byte (hex) address separated by
  dots(.).  The default value is the ATM Forum WELL KNOWN Address.
Server Type
  This should be "lecs" if the server is a configuration server or "les" if
  the server is the LAN Emulation Server. 
UNI Version
  3.0 is default