| CLT-105.EXE |
776.260 |
26.05.97 |
Latest firmware for CARDLINE-TWIN V1.005. Please refer to the release note for
further information. This file contains information in english and german on how
to upgrade ("flash") the modem firmware as well as the necessary modem INF files
for Windows95 / WindowsNT-4. Before installing your Cardline-Twin please turn
off the PCMCIA power management (START/SETTINGS/CONTROL PANEL). |
| SLT-1-02.EXE |
857.665 |
30.05.97 |
Firmware for SAFELINE-TWIN V1.002 (X.75 update, LEDS). This file contains
information in english and german on how to upgrade ("flash") the modem
firmware. |
| SMT-102H.EXE |
656.159 |
30.05.97 |
Latest Firmware for SWISSMOD-TWIN V1.002H (SyncPPP). This file contains
information in english and german on how to upgrade ("flash") the modem
firmware. |
| 95INF-G.EXE |
20.161 |
23.05.97 |
Latest Telelink "TWIN-Modem" INF information file for Win95 & WinNT-4.
Cardline-Twin users with the firmware release V1.002D who were having
difficulties installing there modem under the new OEM release of Windows95 (B
release, OSR-2) should use the INF file 95INF-Z1.EXE below until they have
updated their firmware to V1.005. New in this INF file is support for 38400bps
when using the V110 ISDN protocol. (Cardline-Twin only at the moment,
Safeline-Twin and Swissmod-Twin will be supported in the next firmware release,
aprox end of june '97. |
| 95INF-Z1.EXE |
135.730 |
14.05.97 |
Latest Telelink "TWIN-Modem" INF information file for Win95 & WinNT-4. For
Cardline-Twin users, with the firmware release V1.002D who were having
difficulties installing there modem under the new OEM release of Windows95 (B
release, OSR-2) should use this INF file 95INF-Z1.EXE. Safeline-TWIN and
Swissmod-TWIN users should use the 95INF-E.EXE above. Before installing your
Cardline-Twin please turn off the PCMCIA power management
(START/SETTINGS/CONTROL PANEL). |
| 95INFANB.EXE |
18.029 |
02.12.96 |
Latest Telelink "Analog-Modem" INF information file for Win95 & WinNT 4.0 |
| HELPV13D.EXE |
150.959 |
12.05.97 |
Telelink "TWIN-Modem" Helpfile (V1.3D) in Windows format |
| BLUEWIN.EXE |
31.171 |
20.12.96 |
Telelink "TWIN-Modem" BLUE-WINDOW modem configuration file for Windows 3.xx |
| BLUE_ANA.EXE |
31.280 |
11.02.97 |
Telelink "Analog-Modem" BLUE-WINDOW modem configuration file for Windows 3.xx |
| VTXWINX.EXE |
21.938 |
14.01.97 |
Latest "TWIN" Drivers for the software VTXWinX Version 2.0x from Furrer & Partner
(SwissOnline-VTX). |
| RVS_W311.EXE |
18.023 |
07.11.96 |
Latest "TWIN" Drivers for RVSCOM Lite V1.02 (Windows 3.11 & WfWG 3.11) |
| RVS_01.EXE |
20.525 |
11.02.97 |
RVSCOM V1.02 for Win95: How to fix, Error Message "cannot find vcapi.vxd" during
boot process. This problem occurs when the RVSCOM install program does'nt
install Disk-4 |
![[Home]](../../gifs/home.gif){kind=small}