Path: menudo.uh.edu!usenet From: jph@anaconda.bloomington.in.us (J.P. Hillenburg) Newsgroups: comp.sys.amiga.reviews Subject: REVIEW: GVP ioExtender board Followup-To: comp.sys.amiga.hardware Date: 9 Jun 1993 13:32:23 GMT Organization: The Amiga Online Review Column - ed. Daniel Barrett Lines: 222 Sender: amiga-reviews@math.uh.edu (comp.sys.amiga.reviews moderator) Distribution: world Message-ID: <1v4op7$npj@menudo.uh.edu> Reply-To: jph@anaconda.bloomington.in.us (J.P. Hillenburg) NNTP-Posting-Host: karazm.math.uh.edu Keywords: hardware, serial, parallel, MIDI, Zorro II, commercial PRODUCT NAME GVP ioExtender (With version 1.7 software) [MODERATOR'S NOTE: This review was updated on Jan 24, 1994. Search for the text "[UPDATE:" to find updated information. -Dan] BRIEF DESCRIPTION The ioExtender is a Zorro II hardware product which expands your Amiga 1500, 2000, 3000, or 4000 by two serial ports, one parallel port, and one MIDI port, in an extensible manner. The ioExtender is capable of any speed from 1 to 614400 baud. It also is designed to work cleanly with the ports contained in the G-Force 040 accelerator. However, I was not able to test this. AUTHOR/COMPANY INFORMATION Name: Great Valley Products Address: 600 Clark Avenue King of Prussia, PA 19406 USA Telephone: (215) 337-8770 Facsimile: (215) 337-9922 LIST PRICE $149.00 (US), with mailorder prices ranging from $110 to $130. I paid $150, but in recent weeks the price seems to have dropped dramatically. SPECIAL HARDWARE AND SOFTWARE REQUIREMENTS HARDWARE Requires a Zorro II-capable Amiga. No extra RAM is required, but 1 megabyte minimum is my recommendation. Does not require a hard drive, but the documentation assumes that you are using one. Does not require any particular CPU. SOFTWARE None. COPY PROTECTION None. It's a Zorro II-based dongle. :) MACHINE USED FOR TESTING Model used: Amiga 3000 RAM: (Fast) 16 megabytes 70 nanosecond Static Column ZIPs (Chip) 2 megabytes 80 nanosecond DIPs Kickstart version 37.175 Workbench version 38.30 Tested with: Commodore MPS-1270 InkJet Printer SupraFAXModem V.32bis (ROM version 1.200H) Best Data 'Smart One' 2400X REVIEW I tested the ioExtender specifically with Terminus 1.926, AmigaUUCP 1.16D, DNet 2.10, GPFax 2.23, JR-Comm 1.02a, term 3.3, VLT 5.576, TrapDoor 1.80, TransAmiga BBS 1.1, and PrintManager 1.1. In the case of all of the above programs, I was able to merely set my serial device and go. Once the device was set, it was mechanically no different than using the internal port. However, there was a noticeable performance increase. CPU usage dropped drastically. Unfortunately, selecting the parallel port for printer use is not so clean. You have to use the supplied "GVPIOControl" program to intercept parallel.device calls and route them to gvppar.device. I do not blame this on GVP, but on Commodore, since selecting which hardware port printer.device uses isn't nearly as easy as selecting serial devices. Audio digitizers tend to hit the Amiga parallel port hardware directly; so this merely allows you to use the I/O Extender to drive the printer, while the digitizer goes along on its merry way, banging the internal parallel port. [UPDATE: The reviewer has found a workaround. See the NEW INFORMATION section at the end of this file. - Dan] GVP supplies 1/3 of a disk full of support programs, including the driver program, a port-interceptor program, a serial preferences program, an interceptor-preferences program, a system-information program, and a program which even improves native Amiga serial.device performance. The "GVPSerial" preferences program closely resembles the AmigaDOS 2.1 preferences, except for a few changes required for the board's nature (e.g., selecting which particular port, and, if you have multiple ioExtenders and/or a G-Force 040, which board). The "GVPIOControl" program allows you to redirect the serial.device and parallel.device to the gvpser.device and gvppar.device, respectively. However, one should have to do this only with the parallel.device, as most properly written, modern programs allow you to select the serial device driver. The "GVPIO" program simply goes in SYS:Expansion, and is the basis for the software driver. The "GVPinfo" program provides general system information. It specifically recognizes the ioExtender, by full name. It also displays information customary to this type of program, such as particular chips, RAM information, etc. A similar program, Nic Wilson's "SysInfo", mistook the I/O Extender for a GVP Series II SCSI Board. Commodore's "ShowConfig" program identified the board as a generic hard-drive controller, but provided no specifics. The "GVPPatch" program breaks up DMA packets to allow better serial.device performance, which I assume would work for other devices as well. The board itself contains two very-high-speed DB9 serial ports, one DB23 parallel port, one MIDI sub-port, and one expansion port. The MIDI port is a 9-pin port which attaches to an optional MIDI-expansion box. This box gives you full MIDI-expansion capability, via one "In" connector, three "Out" connectors, and one "Thru" connector. The expansion port is an internal port directly on the board which allows later attachment of other I/O related devices. I have heard mumblings of Ethernet capability for this port. DOCUMENTATION Documentation is provided in a 44-page plastic-bound manual. It has instructions for board installation in the A2000 and A3000, but not for the A4000. It also has clear, concise information on the necessary software, but doesn't document the "GVPinfo" and "GVPPatch" programs. "GVPPatch" does come with on-disk documentation. The documentation provides application examples for JR-Comm and AmigaVision, but assumes that the user would know how to use these to other programs. (Not too difficult, however.) It provides information which I would deem appropriate for someone who is moderately versed in Amiga specifics. While not assuming the user is a "technogeek" who knows the machine up and down, it is not for the weak at heart either. LIKES AND DISLIKES I like the fact that the ioExtender provided a fast, cheap, addition to my system. It provided additional ports which I had needed. I dislike the fact that the card was about 1 millimeter too large for my A3000, requiring me to remove one of the beige clips which would normally hold the front of the card in place. This particular process is fairly easy, and involves prying the clip out of place with a screwdriver. COMPARISON TO OTHER SIMILAR PRODUCTS I have no real basis for comparison. However, I do wish it had the 7 serial ports as per the Commodore A2232. Those are only 19200 baud, however. You can't have everything. BUGS None found. VENDOR SUPPORT I have had no problems other than the clip removal, so have had no need to contact GVP. WARRANTY No conclusive warranty information given. I find this to be disturbing, but not a deterring factor, as I have not ever seen or heard of a problem with the board that a software upgrade did not fix. CONCLUSIONS I am happy with my ioExtender. It seems to perform well and as advertised. I give it a 4 out of 5, as I feel it should have installed cleanly without the requirement of removing the clip near the front of the machine. There is a lot of empty space on the board, and I believe the board could have been manufacturered to require a lot less space. COPYRIGHT This review is freely distributable as long as my name remains within it, identifying me as the author. Express permission is given to both Fred Fish and BLAZEMONGER INCORPORATED to use the review for any reasonable purposes. I also disclaim any responsibility for any result of using this review, unless said result is positive from my viewpoint. ioExtender is a trademark of Great Valley Products, Inc. Amiga is a registered trademark of Commodore Business Machines. Terminus is a trademark of John P. Radigan. All other trademarks are held by their respective owners. NEW INFORMATION [UPDATE:] Since writing the ioExtender review, I have corrected the problems with selecting a proper printer.device. I have found out that Commodore did provide a means for doing this, but there is no direct way to do it. I accomplished it by hex-editing the file ENV:Sys/printer.prefs. Also note that the following is totally applicable to other parallel devices. 0) Copy your file ENVARC:Sys/printer.prefs to a safe place, so you can restore it if something goes wrong. 1) Find a decent hex editor, preferably FileX. Make sure that the text column is 16 characters wide. (It doesn't have to be, but makes things much easier for our purposes.) 2) Look for the word 'PUNT' in the text column. Place your cursor on the P, and then go down exactly two rows. You can then type the name of your parallel device, without the .device. (e.g. "gvppar") [MODERATOR'S NOTE: "Go down two rows" in this case means "move forward 32 characters," since each row contains 16 characters in Joseph's example. This information may help you if you are using a hex editor other than FileX. - Dan] 3) Once you have tested printing to make sure it works, run SYS:Prefs/Printer and SAVE the preferences. This will copy it to ENVARC:, and at the same time, verifying your changes. Here is a hex listing of my printer.prefs file: 0000: 464F524D 0000009A 50524546 50524844 FORM....PREFPRHD 0010: 00000006 00000000 00005054 58540000 ..........PTXT.. 0020: 00400000 00000000 00000000 00000000 .@.............. 0030: 00004570 736F6E58 00000000 00000000 ..EpsonX........ 0040: 00000000 00000000 00000000 00000000 ................ 0050: 00000000 00020042 00000000 0005004B .......B.......K 0060: 00005055 4E540000 00380000 00000000 ..PUNT...8...... 0070: 00000000 00000000 00000000 00000000 ................ 0080: 00006776 70706172 00000000 00000000 ..gvppar........ 0090: 00000000 00000000 00000000 00000000 ................ 00A0: 0000 .. Here is my modified printer.prefs file uuencoded, for those too lazy to do the above themselves: begin 777 env:sys/printer.prefs M1D]230 )I04D5&4%)(1 8 !05%A4 0 X M !%<'-O;E@ ( 0@ X M !0!+ !054Y4 . &=V<'!AX ;<@ X X end -- Joseph Hillenburg (xterm), NPS Technologies, Bloomington, Indiana UUCP: jph@anaconda.bloomington.in.us \ / Long live the Hornet My BBS: The Wrong Number BBS, w/BMS +----o0o----+ +1 812 332 7379 (V.32bis) --- Daniel Barrett, Moderator, comp.sys.amiga.reviews Send reviews to: amiga-reviews-submissions@math.uh.edu Request information: amiga-reviews-requests@math.uh.edu Moderator mail: amiga-reviews@math.uh.edu