You should follow these instructions if you want to put the electronical parts onto a mini-adaptor, which you can hide inside the case of the parallel port plug.
On circuit diagrams, plugs are displayed as viewed from the back side, the solder side. Chips are displayed as viewed from above; also, see the small semicircular cut for finding the correct orientation. When in doubt, see the corresponding description on the legend page.
First, create the 1541EMU mini-adaptor.
You need the following parts to build this cable:
One power cable
One solderable 6-pin male DIN plug (Commodore serial plug)
A shielded 3-wire or unshielded 4-wire cable of, preferably, at most 2 meters
You can find the description of all parts used on the diagrams at the legend page.
Contact |
Copyright and license |
Blog page | Recent updates |
Title page
(This page best viewed with any browser)